The short answer
Bath is unlike almost anywhere else in the UK. The whole city is a UNESCO World Heritage Site and sits inside one city-wide conservation area, and Bath and North East Somerset has around 660 Grade I listed buildings – one of the highest concentrations in the country – plus thousands more at Grade II* and Grade II. If you own a Georgian townhouse, a flat in a crescent or a stone cottage in Widcombe, Larkhall or Weston, there's a good chance the rules apply to you.
The key points:
- Listed building consent is needed for any work – inside or out – that affects the character of a listed building. That includes things many people don't expect, like removing old plaster, changing internal doors or fitting secondary glazing.
- Genuine like-for-like repair usually doesn't need consent – but ask the council's conservation team first so they can confirm it really counts as repair.
- Applying is free, and the council says it grants about 95% of listed building applications, including retrofit and energy-saving work.
- Doing work without consent is a criminal offence. In 2025 two firms were fined a total of £190,000 for unauthorised works to a Grade I building in central Bath.
- Choose trades who know old buildings – Bath stone, lime, timber sash windows and traditional roofs – and who'll tell you when consent is needed.
This guide explains how the rules work in Bath, what you can usually do without consent, which jobs need it, and how to find builders, joiners, roofers and decorators who are right for the job. It's general information, not planning or legal advice – always check with Bath and North East Somerset Council before you start. Sources are at the bottom of the page.
Step by step: planning work on a listed or conservation-area home in Bath
- Find out what's protected. Look up your address on the National Heritage List for England (Historic England). Check whether the building is listed and at which grade. Listing covers the whole building, inside and out, plus fixed objects and some structures within its grounds.
- Work out whether you need consent. Repair with matching materials usually doesn't; alteration usually does. If in doubt, ask the council's conservation team.
- Use the council's pre-application service for anything more than a small job. It takes about 20 to 25 working days and includes a site visit.
- Get specialist trades to quote. Ask for experience of listed buildings, references from local jobs and their view on whether consent is needed.
- Prepare a heritage statement with your application, explaining what's significant about the building and why your proposal is acceptable. An architect or heritage consultant can help.
- Apply through the Planning Portal – listed building consent, plus planning permission and building regulations if they're also needed.
- Don't start until consent is granted, and follow any conditions – for example approval of samples, joinery details or mortar mixes.
- Keep records – consents, drawings, photos and invoices. Buyers' solicitors will ask for them when you sell.
Why the rules are stricter in Bath
The World Heritage Site and the city-wide conservation area
The City of Bath was inscribed as a World Heritage Site in 1987 for its Roman remains, its Georgian architecture and town planning, and the way the city sits in its green landscape setting. In 2021 it was also inscribed as one of the Great Spas of Europe. The entire city is a conservation area.
That means even unlisted homes in Bath have fewer "permitted development" rights than homes elsewhere. Things like replacing windows with a different style, cladding walls, adding dormers or putting solar panels on a front roof slope can need planning permission in a conservation area or World Heritage Site that wouldn't need it elsewhere. Check the council's permitted development checklist before you plan any outside changes.
Listed buildings
Listing applies to the whole building – the front elevation everyone sees, but also the interior, the staircase, the plasterwork, the floors, the doors and the roof structure. A Grade II townhouse is protected inside just as much as outside. Bath's terraces are often "group listed", so your house might be listed as part of a whole terrace or crescent.
| Grade | What it means |
|---|---|
| Grade I | Buildings of exceptional interest – a small share nationally, but around 660 in B&NES |
| Grade II* | Particularly important buildings of more than special interest |
| Grade II | Buildings of special interest – most listed homes |
What usually needs listed building consent – and what doesn't
The test in the law is whether the work affects the character of the building as one of special architectural or historic interest. That's a judgement, which is why it pays to ask early.
Usually no consent needed
- like-for-like repair with matching materials – for example replacing a few broken slates with matching natural slate, or patching lime plaster with lime plaster
- general maintenance – clearing gutters, repainting already-painted joinery in the same colour, fixing a dripping tap
- loose loft insulation laid between joists, in most cases
- general draught-proofing, in most cases
Usually consent needed
- replacing windows or doors, or changing glazing – including secondary glazing, which the council's guidance says needs consent
- removing or altering internal walls, fireplaces, staircases, doors, cornices, panelling or historic plaster
- repointing or rebuilding stonework with different materials, or cleaning or painting Bath stone
- internal wall insulation and most other retrofit measures beyond the simplest
- new bathrooms or kitchens where historic fabric, floors or walls are affected
- changes to roofs, chimneys and rainwater goods
- satellite dishes, solar panels, flues, vents and new services runs through historic fabric
Bath stone, lime and the outside of your home
Bath is built from Bath stone – a soft, honey-coloured oolitic limestone. It's beautiful but vulnerable:
- Cement mortar and cement render are harder and less breathable than the stone. They trap moisture, so the stone around them decays faster. Traditional buildings in Bath should normally be repointed with lime mortar matched to the original.
- Cleaning stone with harsh methods can strip the protective surface. Get advice before any cleaning.
- Painting previously unpainted stone, or changing the colour of a painted façade, will usually need consent.
- Stone repairs – indents (new pieces of stone), lime-based mortar repairs or replacing decayed stones – should be done by a mason who knows Bath stone.
Ask any builder or stonemason exactly what mortar they'll use, how it will be matched to the existing, and whether they've worked on listed buildings in Bath before. A specialist will be happy to explain.
Sash windows and slim double glazing
Timber sash windows are one of the defining features of Georgian Bath, and they're the single biggest source of listed building questions. Your options, roughly from least to most intrusive:
- Repair and overhaul – splicing in new timber, re-cording, re-glazing with putty and draught-proofing. A good joiner can transform a draughty old sash, and this often needs no consent if it's genuine repair.
- Shutters, curtains and thick blinds – Bath's houses were designed with shutters, and using them is one of the cheapest ways to cut heat loss.
- Secondary glazing – a discreet inner pane. The council's guidance says this needs listed building consent, but it's often acceptable when designed carefully.
- Slim-profile or vacuum double glazing – thin double-glazed units in timber sashes. Some applications in Bath have been granted, particularly where existing windows aren't historic, but each building is assessed individually.
- uPVC replacement – very unlikely to be acceptable on a listed building, and often resisted in the conservation area too.
Look for a window specialist or joiner who repairs sashes, not just one who replaces them.
Energy saving in a listed Bath home
There's a common belief that you can't make a listed building warmer. That's not true, and the council actively encourages sensible retrofit. B&NES has an Energy Efficiency, Retrofitting and Sustainable Construction supplementary planning document and free factsheets for residents, and it stresses that basic maintenance and repairs should come first, to deal with damp.
A sensible order:
- Fix leaks, gutters, downpipes and failed pointing so walls can dry out.
- Draught-proof windows, doors, floors and chimneys (with a chimney balloon or damper when not in use).
- Insulate the loft, using breathable materials where needed.
- Use shutters and heavy curtains.
- Consider secondary glazing, floor insulation and, where appropriate, breathable internal wall insulation – with consent.
- Look at heating upgrades last, once heat loss is reduced.
Our guide to new boiler costs covers heating options if your system is due for replacement.
Roofs, chimneys and rainwater goods
Bath's roofs are mostly natural slate or clay tile, with lead gutters, parapets and stone chimney stacks hidden behind the parapets of terraces. Hidden parapet gutters are a common source of leaks that go unnoticed for years. Like-for-like repairs with matching materials usually don't need consent, but replacing materials (for example natural slate with artificial slate, or lead with a substitute) generally does. A roofer who works on period properties will know the difference. Our roof repair costs guide has typical prices.
The cost of getting it wrong
It's a criminal offence under the Planning (Listed Buildings and Conservation Areas) Act 1990 to carry out works that affect a listed building's character without consent. The council can also require you to put things back as they were, at your own cost.
Bath and North East Somerset Council takes enforcement seriously. In December 2025, two companies – an estate agency and a building firm – were fined a total of £190,000 after historic floor structures at a Grade I building on Wood Street were removed and replaced with modern materials, despite the conservation officer advising that consent was needed. Both the property owner and the contractor were prosecuted.
That's why a good builder will refuse to start until the paperwork is right – and why you should be wary of anyone who says "nobody will notice".
Choosing the right trades for a Bath period home
| Job | Who to look for |
|---|---|
| Stone repair, repointing in lime | A stonemason or conservation builder |
| Sash window repair, shutters, doors | A specialist joiner |
| Slate, lead and parapet gutters | A roofer experienced with period properties |
| Lime plaster and cornices | A traditional plasterer |
| Painting with breathable paints | A painter and decorator who uses limewash and traditional paints |
| Wiring with minimal damage | An electrician used to working in listed buildings |
| Heating and hot water | A Gas Safe heating engineer |
Questions to ask every tradesperson
- Have you worked on listed buildings in Bath? Can I see examples or speak to past customers?
- Do you think this job needs listed building consent? Why or why not?
- What materials will you use – lime or cement, natural slate, traditional paint?
- Will you repair or replace? Can more of the original be kept?
- Are you happy to work to conditions and wait for approvals of samples or details?
- Do you have public liability insurance?
- Will you give a written quote with a clear specification?
Our guide on how to choose a builder covers contracts, payments and warning signs in more detail. Building conservation qualifications and memberships – for example of the Institute of Historic Building Conservation or SPAB courses – are a good sign, though plenty of excellent local trades learned on the job.
Examples: three Bath homes
These are illustrative examples, not advice for any specific building.
A Grade II townhouse in Walcot with draughty sashes. A specialist joiner overhauls the sashes – new parting beads, draught-proof brushes, re-corded weights, spliced repairs to rotten sills. Because this is repair with matching materials, the owner checks with the conservation team, who confirm consent isn't needed. Shutters are restored at the same time.
A Grade II flat in a crescent wanting secondary glazing. The owner applies for listed building consent with drawings showing slim, removable secondary panels aligned with the glazing bars. After a pre-app visit, consent is granted with a condition to approve the final design.
An unlisted stone cottage in Larkhall. The owner wants to replace failing cement pointing and cement render that's causing damp. It isn't listed, but it's in the conservation area. A builder experienced with lime removes the cement carefully and repoints in lime. No consent is needed for the repointing, but the owner checks before changing the front windows.
Finding trades in Bath
Search our listings for builders, roofers and other trades around Bath and across Somerset. If you also own or are buying older property elsewhere, the same principles apply in historic cities like York, Edinburgh and Cambridge – although each council has its own local guidance.
Frequently asked questions
Do I need listed building consent to repaint my front door in Bath?
Repainting an already-painted door in the same colour is normally maintenance. Changing the colour of a listed building's door or façade can affect its character, so check with the conservation team first – some colours are expected in particular terraces.
Is listed building consent free?
Yes. There's no fee for listed building consent. If you also need planning permission, the normal planning fee applies.
Can I put double glazing in a listed building in Bath?
Sometimes. Each case is assessed individually. Slim-profile double glazing in timber sashes has been granted in some Bath buildings, especially where the existing windows aren't historic. Secondary glazing also needs consent but is often acceptable. uPVC windows are very unlikely to be approved.
Is the whole of Bath a conservation area?
Yes. Bath has a city-wide conservation area, and the whole city is a World Heritage Site. That reduces some permitted development rights even for unlisted homes.
What happens if I do work without consent?
It's a criminal offence, with an unlimited fine and, in serious cases, prison. The council can also make you reverse the work. Contractors can be prosecuted as well as owners.
Can I repoint my Bath stone house with cement?
It's not recommended on traditional buildings. Cement traps moisture and can damage Bath stone. Lime mortar matched to the original is normally the right choice, and changing materials on a listed building usually needs consent.
How long does listed building consent take?
The statutory target is eight weeks once an application is valid. The council's pre-application service takes about 20 to 25 working days and is worth doing first for bigger projects.
Who can tell me if my house is listed?
Search the National Heritage List for England on Historic England's website, or ask Bath and North East Somerset Council's planning department.
Sources
- Bath & North East Somerset Council – Applying for listed building consent factsheet (January 2025) (95% of applications consented; pre-app 20–25 working days)
- Bath & North East Somerset Council – Energy measures and listed building consent factsheet (draught-proofing usually no consent; secondary glazing needs consent)
- Bath & North East Somerset Council – Permitted development checklist (conservation area and World Heritage Site limits)
- Bath & North East Somerset Council – Retrofit case study (Grade I terrace; slim double glazing consent granted 2021)
- Bath & North East Somerset Council – Energy efficiency and retrofitting SPD (considerations for listed buildings and the World Heritage Site)
- Bath & North East Somerset Council newsroom – Two companies prosecuted (unauthorised works to a Grade I listed building)
- Local Government Lawyer – Two firms fined £190k over unauthorised works (historic floor structure replaced despite advice)
- TwinFM – Knight Frank and Emery Brothers prosecuted (December 2025) (£190k fines; 4 Wood Street, Grade I)
- Somerset Council – Unauthorised works to listed buildings (sensitive repair usually doesn't need consent – ask first)
- Bath Preservation Trust – Planning application comment, Caroline Buildings (few examples of vacuum double glazing in Bath)
- Wikipedia – Grade I listed buildings in Bath and North East Somerset (663 Grade I listed buildings in B&NES)