Cost guide

How much does a new bathroom cost to fit in 2026?

What a new bathroom costs in the UK in 2026 – supply-and-fit prices for cloakrooms, family bathrooms, en suites and wet rooms, fitter and tiler rates, costs of baths, showers and tiling, the regulations on electrics, ventilation and hot water, accessible bathroom grants and how to compare quotes.

By The UK Business Directory teamUpdated 12 min read

The short answer

A new bathroom in the UK typically costs £4,500 to £11,000 in 2026 for a supply-and-fit job, with most family bathrooms landing around £6,500 to £7,000. MyJobQuote's 2026 data gives an average of about £7,000, and Bathroom Mountain puts a standard mid-range installation at £4,500 to £9,000.

A small cloakroom with a toilet and basin can cost as little as £3,000. A large bathroom with a freestanding bath, a walk-in shower, underfloor heating and floor-to-ceiling porcelain tiles can easily pass £15,000, and luxury projects reach £30,000 or more.

Labour usually accounts for £1,800 to £5,000 of the total. Plumbing, tiling and electrics together make up a big share of the spend – Screwfix estimates around 60% – which is why moving things around costs far more than replacing them where they are. A typical bathroom takes five to ten working days.

This guide shows what each part costs, how prices change for en suites and wet rooms, the rules on electrics, ventilation and hot water that your fitter should follow, help available for accessible bathrooms, and how to compare quotes. Every figure is listed in the sources at the bottom of the page.

£7,000average new bathroom, supply and fitMyJobQuote 2026
£1,800–£5,000labour for a typical refitdepends on size and layout
£5,500average wet roomMyJobQuote 2026
5–10 daysto fit a family bathroomlonger for wet rooms

Step by step: getting a new bathroom fitted

  1. Decide what you need. Bath, shower or both? Storage? A second basin? Is anyone in the house older or less mobile, now or soon?
  2. Keep the layout if you can. The toilet's position is fixed by the soil pipe; moving it is the most expensive change. Moving a bath or shower costs less, but still adds plumbing time.
  3. Set a budget with a 10–15% buffer. Old bathrooms often hide rotten floorboards, leaking pipes or damp walls.
  4. Choose supply-and-fit or labour-only. Either the fitter supplies everything, or you buy the suite, tiles and fittings yourself and they fit them.
  5. Get two or three detailed quotes. Each should list removal of the old suite, plumbing, electrics, plastering, tiling, flooring, waste and decorating.
  6. Order everything in good time. Check every item on delivery. Missing parts are the biggest cause of delays.
  7. Plan the week without a bathroom. If it's your only one, ask the fitter to keep a working toilet as long as possible each day.
  8. Sign off and collect your paperwork. Electrical certificate for any notifiable work, product guarantees, and the fitter's own workmanship guarantee.

New bathroom costs by size and type

These are typical 2026 supply-and-fit prices outside London, including labour, a mid-range suite, tiling and waste removal.

RoomTypical sizeBudgetMid-rangeHigh-end
Cloakroom (toilet and basin)Under 2 m²£1,500–£3,000£3,000–£4,500£4,500–£7,000
Small en suite (shower, toilet, basin)2–4 m²£3,000–£5,000£5,000–£7,500£7,500–£12,000
Family bathroom (bath, shower, toilet, basin)4–8 m²£4,500–£6,500£6,500–£11,000£11,000–£20,000+
Wet room3–6 m²£4,000–£5,500£5,500–£8,000£8,000–£15,000+

In London and the South East, expect around 12% to 18% more, according to Bathroom Mountain, and more again in central London where access, parking and waste removal are harder.

What the labour costs

Bathroom fitters and plumbers

Some bathroom fitters do everything – plumbing, tiling, carpentry and plastering – while others are plumbers who bring in a tiler and electrician. Typical 2026 labour rates:

TradeTypical day rate
Bathroom fitter£180–£300
Plumber£250–£400 (London more)
Tiler£180–£250, or £30–£60 per m²
Electrician£250–£400
Plasterer£180–£280

Labour for a whole job usually works out at:

JobLabour only
Cloakroom or small bathroom£2,000–£3,500
Family bathroom£3,000–£5,000
Large bathroom or wet room£4,500–£7,000+

Labour-only versus supply-and-fit

With labour-only, you buy the suite, tiles and fittings and the fitter installs them. You may save on the fitter's mark-up, and you choose exactly what goes in. The downside is that if a part is wrong, missing or faulty, it's your problem, and delays cost you time.

With supply-and-fit, the fitter or bathroom company supplies everything. It costs a little more, but they take responsibility for the right parts arriving and for anything that goes wrong. Many people find it less stressful.

What the parts cost

The suite and fittings

ItemTypical supply priceTypical fitting time
Standard 3-piece suite (acrylic bath, toilet, basin)£400–£1,2001–2 days
Freestanding bath£600–£3,000Half a day to 1 day
Thermostatic mixer shower£150–£6004–6 hours
Electric shower£100–£4003–5 hours plus electrics
Shower tray and enclosure£300–£1,000Half a day to 1 day
Vanity unit with basin£200–£1,0002–4 hours
Wall-hung toilet with frame£300–£1,000Half a day
Heated towel rail£80–£5002–4 hours

A shower tray, waste and frameless sliding enclosure supplied and fitted typically comes to £600 to £1,500 before tiling the walls.

Tiling

Tiling is the most underestimated part of many bathroom budgets. Labour alone is usually £30 to £60 a square metre, and more for large-format tiles, mosaics, herringbone patterns and natural stone, which take longer.

TilesSupply and fit per m²
Budget ceramic (you supply the tiles)£20–£35 labour
Mid-range porcelain£35–£50
Large-format porcelain or natural stone£50–£80+

A typical family bathroom might have 15 to 25 square metres of wall and floor tiling – so the difference between budget and premium tiles can easily be £1,000 or more.

Flooring and heating

Vinyl and LVT are the cheapest bathroom floors. Porcelain tiles look great but cost more to lay. Electric underfloor heating mats usually add £300 to £800 for a bathroom, plus the electrician's connection.

En suites

An en suite is usually smaller than a family bathroom, but rarely proportionally cheaper. The same trades are needed for fewer days, and small rooms can be fiddly to work in. Creating a new en suite from part of a bedroom costs much more than replacing an existing one: you'll need a stud wall, a door, new waste pipes and possibly a macerator if there's no easy route to the soil pipe. Budget £5,000 to £12,000 or more for a new en suite, depending on how far the waste has to travel.

Wet rooms

A wet room has a level floor with the shower draining straight into a floor drain, and the whole room waterproofed ("tanked"). They're popular for modern design, small rooms and accessibility.

MyJobQuote puts the average wet room at around £5,500 in 2026, with most costing £4,000 to £7,000 and taking four to seven days. Labour usually comes to £1,300 to £3,200. Tanking and drainage alone often add £1,500 to £3,000 compared with a standard shower.

Wet rooms on timber floors need extra care. Suspended timber floors flex slightly, which can crack tanking over time, so installers use pre-formed wet room formers designed for timber and strengthen the joists where needed. On a concrete floor, the floor can be dug out or screeded to the right fall. Ask your installer exactly how they'll waterproof and create the fall, and what guarantee they give.

Rules your bathroom work must follow

Replacing a bathroom like-for-like doesn't normally need permission, but several parts of the work are covered by the Building Regulations:

Electrics

Bathrooms are "special locations" in the wiring regulations because of the risk of water and electricity mixing. In England, any new circuit, a new consumer unit, and additions or changes to circuits in a room with a bath or shower are notifiable under Part P. In Wales, the rules are broader. This work should be done by a registered electrician who can self-certify it and give you a certificate. Lights, fans and shaving sockets must be rated for the zone they're in. Our guide to electrician costs has typical prices for this kind of work.

Ventilation

A bathroom needs an extractor fan. The usual guide in Part F of the Building Regulations is at least 15 litres a second for an intermittent fan in a bathroom, and many fitters fit a fan linked to the light with an overrun timer, or a humidity-sensing fan. Poor extraction is the most common cause of mould in bathrooms.

Hot water safety

In England and Wales, Part G requires that a new bath is fitted with a device that limits the hot water to the bath tap to a maximum of 48°C, usually a thermostatic mixing valve. It's to prevent scalding, especially for children and older people. Your fitter should fit one as standard.

Plumbing and water regulations

All plumbing must meet the Water Supply (Water Fittings) Regulations 1999 – for example, preventing dirty water flowing back into the mains. Use fittings that are approved (look for WRAS approval) and a plumber who knows the rules.

Flats and listed buildings

In a flat, check your lease – many need the freeholder's consent for changes to plumbing or floors, and some require sound insulation. In a listed building, internal changes may need listed building consent.

Accessible bathrooms and help with costs

If you or someone in your home is disabled or has mobility problems, there may be help with the cost of an accessible bathroom or wet room.

  • Disabled Facilities Grant (DFG). Councils in England can give grants of up to £30,000 towards adaptations such as level-access showers and wet rooms, subject to a means test (not for children). Wales, Scotland and Northern Ireland have their own schemes with different limits and rules.
  • VAT relief. Some building work and products to adapt a home for a disabled person can be zero-rated for VAT. Your installer needs to know before they invoice – ask about it early.
  • Occupational therapy assessment. Councils usually arrange an assessment first. The OT can recommend exactly what's needed, such as grab rails, a seat, a raised toilet or wider door.

Even if no one needs it now, many people choose a walk-in shower, a slightly raised toilet and a few concealed grab-rail fixings when they renovate, as it's much cheaper to do it now than later.

Examples: what three bathrooms might cost

These are illustrative 2026 examples outside London, to show how the total adds up. They're not quotes.

Small en suite refreshMid-range family bathroomPremium family bathroom
Suite, taps and shower£900£2,200£5,500
Tiles and adhesive£400£1,000£2,500
Labour (fitting, plumbing, tiling)£2,400£3,800£5,500
Electrics (fan, lights, towel rail)£300£600£1,200
Flooring and underfloor heating£200£400£900
Plastering and decorating£200£400£700
Skip and waste£200£250£300
Totalabout £4,600about £8,650about £16,600

How long does a bathroom take?

StageTypical time
Strip out the old bathroomHalf a day to 1 day
First-fix plumbing and electrics1–2 days
Boarding, plastering, tanking1–2 days
Tiling2–4 days
Fitting the suite (second fix)1–2 days
Silicone, decorating and snagging1 day

So most bathrooms take one to two weeks, and wet rooms or bigger projects up to three weeks. Tiles, adhesive and tanking need drying time, so a fast quote isn't always a better one.

How to keep the cost down

  • Keep the toilet where it is. Moving the soil pipe is the single most expensive layout change.
  • Re-use what's good. A good-quality bath or a recent shower can often stay.
  • Tile only where needed. Tile around the bath and shower and use waterproof paint elsewhere, or use wall panels, which are quicker to fit.
  • Choose standard sizes. Off-the-shelf trays and enclosures are much cheaper than made-to-measure.
  • Buy the suite in a sale – but check the fitter is happy with the brand and that the parts are all there.
  • Avoid moving the radiator unless you need to.
  • Do the decorating yourself at the end.

Choosing a bathroom fitter

The best bathroom fitters are booked weeks or months ahead – which is usually a good sign. When you get quotes:

  • Look at their past work and ask for a reference from a recent customer.
  • Get a detailed, written quote listing every item and stage, and what's excluded.
  • Check who does the electrics and that they're registered to self-certify.
  • Ask how they'll waterproof the shower area and what guarantee they give.
  • Check insurance – public liability at the least.
  • Agree stage payments. A deposit for materials and payments as work progresses, with the last payment after you've checked everything.

Be wary of anyone who knocks on your door offering a cheap bathroom, asks for a large cash payment upfront or pressures you to sign on the spot. Our guide on how to choose a builder explains the checks in more detail, and the guide to plumber costs covers smaller plumbing jobs and call-out rates.

You can search our kitchen and bathroom fitters directory and find local plumbers and tilers too. There's plenty of choice in London, Manchester, Birmingham, Leeds, Sheffield, Bristol, Glasgow, Edinburgh, Cardiff and Belfast, and many firms in counties such as Kent and Devon cover a wide area. Doing the kitchen too? See our guide to kitchen fitting costs.

Frequently asked questions

How much does a new bathroom cost in the UK in 2026?

Most supply-and-fit bathrooms cost £4,500 to £11,000, and the average is around £6,600 to £7,000. A small cloakroom can be £3,000, while a large premium bathroom can cost £15,000 or more. London and the South East are typically 12% to 18% higher.

How much does a bathroom fitter charge per day?

Usually £180 to £300 a day for a bathroom fitter in 2026, and £250 to £400 for a plumber. Labour for a typical family bathroom refit comes to around £3,000 to £5,000.

How much does a wet room cost?

The average wet room costs around £5,500, with most between £4,000 and £7,000. Tanking and drainage make them more expensive than a standard shower, and timber floors need extra preparation.

How long does it take to fit a new bathroom?

Most bathrooms take five to ten working days. Wet rooms and larger projects can take up to three weeks, as tanking, adhesive and grout need time to dry.

Do I need building regulations for a new bathroom?

Not for a like-for-like replacement. But electrical work in the bathroom is often notifiable and should be done by a registered electrician, a new bath must have a device limiting the hot water to 48°C, and new extract fans should meet Part F. Flats may need the freeholder's consent.

Can I get a grant for a wet room?

If someone in your home is disabled, a Disabled Facilities Grant from your council may pay towards a wet room or level-access shower – up to £30,000 in England, with different schemes in Wales, Scotland and Northern Ireland. Some adaptation work can also be zero-rated for VAT.

Is it cheaper to buy the bathroom suite myself?

It can be, especially in a sale. But with labour-only quotes, you're responsible for the right parts arriving on time and for faulty items. Supply-and-fit costs more but puts that risk on the fitter.

Should I tile the whole bathroom?

Not necessarily. Tiling the wet areas and using waterproof paint or wall panels elsewhere can save hundreds of pounds. Full tiling looks great and is easy to clean, but it's one of the biggest costs in a bathroom.

Sources

Related guides

Are you a local business?

Add your free listing in about a minute – we write it for you.

Create my listing preview