Cost guide

How much does a new boiler cost in 2026?

What a new boiler really costs in the UK in 2026 – combi, system and regular prices fitted, what's in a fair quote, grants that are still open, and how to avoid overpaying.

By The UK Business Directory teamUpdated 23 min read

The short answer

A straightforward like-for-like combi boiler swap costs about £1,800 to £3,500 fitted in 2026, and most homeowners pay somewhere around £2,300 to £2,800. Converting from an older system with a hot water cylinder and tanks to a combi usually costs £3,000 to £5,700, and replacing an old back boiler can reach £6,000 or more.

Those figures come from several 2026 price studies, including a sample of 2,000 quotes from one national installer and real quotes given by tradespeople on a large quote-comparison site. They include the boiler, the engineer's labour, a standard flue, cleaning the system, removing the old boiler and the paperwork. The rest of this guide explains what changes the price, what a fair quote should include, which grants are still available and how to make sure you get a good installation rather than just a cheap one.

£1,800–£3,500like-for-like combi swapfitted, most homes
£2,300median combi quote2,000 quotes, Jan–Jun 2026
£3,000–£5,700conversion to a combifrom system or regular
£100typical annual servicekeep the warranty valid

New boiler prices by type

The type of boiler you need is the biggest single factor in the price. Most UK homes now have, or switch to, a combi boiler, but a combi isn't right for every home.

Installation (2026)Typical fitted priceUsual time
Combi replaced like for like (same place)£1,800–£3,5001 day
Premium-brand combi, like for like£3,000–£4,5001 day
System boiler replaced like for like£2,200–£4,0001–2 days
Regular (heat-only) boiler like for like£2,200–£4,0001–2 days
Regular or system converted to a combi£3,000–£5,7002–3 days
Back boiler converted to a combi£3,500–£6,000+2–4 days
Combi plus a new central heating system£4,200–£7,5004–7 days

Ranges are taken from published 2026 price guides (see the sources at the bottom). They include VAT where the installer is VAT registered, which most boiler installers are.

Combi boilers

A combi heats water straight from the mains when you turn on a tap, so there's no hot water cylinder and usually no tanks in the loft. They suit most flats and small to medium houses with one bathroom, or two bathrooms that are rarely used at the same time. They are the cheapest boilers to replace like for like, which is why they dominate the market.

A combi's size is measured in kilowatts (kW). Bigger isn't always better: an oversized boiler cycles on and off more, wears faster and costs more to buy. As a rough guide, many two- and three-bedroom homes use a 24 to 30kW combi, and larger homes 30 to 35kW, but the right size depends on your home's heat loss and how much hot water you use at once. A good installer will work it out rather than guess.

System boilers

A system boiler heats a hot water cylinder, but takes water from the mains, so there are no tanks in the loft. They suit homes with two or more bathrooms that are used at the same time, because the stored hot water can feed several taps and showers at once. They also work well alongside solar thermal panels, and can make a later move to a heat pump easier because you already have a cylinder.

Regular (heat-only or conventional) boilers

Regular boilers are found in older homes, with a cold water storage tank and a feed-and-expansion tank in the loft as well as a hot water cylinder. If your pipework is old, switching to a pressurised system could put strain on it, so sometimes a like-for-like regular boiler is the sensible choice.

Back boilers

Back boilers sit behind a gas fire, usually in the living room. They haven't been fitted for years, and replacing one normally means removing the fire, capping the gas, sealing the chimney opening and moving the boiler to a new position – which is why it's the most expensive kind of swap.

Combi swap or full conversion: what's right for your home?

Switching to a combi is popular because it frees up the airing cupboard and loft and gives instant hot water. But it isn't free money, and it doesn't suit every household.

Your homeUsually the best fit
Flat or small house, one bathroomCombi
3–4 bedrooms, one bathroom plus an en-suiteLarger combi or system boiler
Two or more bathrooms used at the same timeSystem boiler with an unvented cylinder
Low mains water pressure or flowSystem or regular boiler (a combi depends on your mains)
Old pipework in poor conditionPossibly like-for-like regular boiler
Planning a heat pump within a few yearsThink twice before removing your cylinder

What's included in a boiler quote

A boiler installation is much more than hanging a new box on the wall. A proper quote should cover all of the following, and you should be able to see each item listed:

  • The boiler make, model and output (kW), and the length of the manufacturer's warranty.
  • Removal and disposal of the old boiler (and any tanks or cylinder if converting).
  • A new flue, and any extension or plume kit if needed.
  • A system clean – a chemical or power flush – plus inhibitor. Building Regulations guidance expects the system to be cleaned and treated when a new boiler is fitted, and manufacturers require it for the warranty.
  • A magnetic system filter to catch sludge.
  • Heating controls: at least a programmable timer and room thermostat, plus thermostatic radiator valves.
  • Any gas pipe upgrade needed – a new boiler often needs a larger gas pipe than the old one.
  • Condensate pipe, run and insulated correctly so it won't freeze.
  • Commissioning, the Building Regulations Compliance Certificate and registering the warranty.
  • Making good: filling holes, boxing in pipes, decorating – or a clear note that this isn't included.

The Boiler Plus rules (England)

In England, the Boiler Plus standard has applied since 2018. Every new gas boiler must be at least 92% efficient (ErP) and come with time and temperature controls. If you're fitting a combi, it must also have at least one extra energy-saving feature: weather compensation, load compensation, smart controls with automation and optimisation, or flue gas heat recovery. A cheap quote that leaves these out isn't compliant.

Scotland, Wales and Northern Ireland have their own building standards, but in practice installers fit similar controls across the UK because modern boilers are designed around them.

The paperwork you should get

When the job is finished, you should receive:

  1. The Benchmark commissioning checklist, filled in and signed – it's usually at the back of the boiler manual.
  2. A Building Regulations Compliance Certificate. A Gas Safe registered installer notifies the job through Gas Safe Register, and the certificate is posted to the homeowner, normally within a few weeks. Keep it safe; you'll need it if you sell your home.
  3. Confirmation that the manufacturer's warranty has been registered (or instructions to do it yourself within the deadline).
  4. The manuals for the boiler and controls.

What makes one quote higher than another

It's normal for three installers to give three quite different prices for the same home. These are the things that move the number.

The brand and model

Boiler makers sell budget, mid-range and premium lines. One 2026 price comparison put budget combi boilers at roughly £900 to £1,300 for the unit alone (about £1,800 to £2,500 fitted). Premium models with longer warranties cost more. Longer warranties are often only offered when the boiler is fitted by an installer accredited with that manufacturer, and they usually require an annual service.

Moving the boiler

Keeping the boiler where it is saves money. Moving it – into a loft, a utility room or from the kitchen to a cupboard – means new gas, water, heating and condensate pipework and a new flue route. One large quote site puts the extra labour for a combi in a new location at roughly £850 to £1,150 on top of a standard swap.

The flue route

A flue that goes straight out through the wall behind the boiler is simple. A flue that has to go up through a roof, along a ceiling or out into a narrow passage needs extra parts and work, and may need a plume kit to keep the steam away from windows and neighbours.

The gas pipe

Modern boilers are often more powerful than the ones they replace, and the gas pipe from the meter must be big enough to supply them. If it isn't, the installer will have to run a new, larger pipe – one of the most common "extras" on boiler quotes.

The state of your heating system

Years of sludge in radiators and pipes will shorten the life of a new boiler. A heavily sludged system may need a power flush, and badly corroded radiators or valves might need replacing. A good installer will check this and explain it, not just add a line to the quote.

Where you live

Labour costs are higher in London and the South East. Installers in rural areas sometimes charge more for travel. Very large national firms often have fixed online prices that don't change much by region – but check exactly what they include. A local installer is often just as competitive: compare heating engineers in London, Birmingham, Manchester, Leeds and Glasgow, or county-wide in Kent, East Sussex and County Durham.

Worked examples: real-world boiler costs

These examples show how a final price builds up. The totals match the published 2026 price ranges above; the line-by-line splits are illustrative, because every installer itemises a little differently. Your own quotes will differ, but the structure should look similar.

Example 1: a straight combi swap in a semi-detached house

A 15-year-old combi in the kitchen has failed. The installer recommends a mid-range 30kW combi in the same position.

ItemCost
Mid-range 30kW combi boiler£1,250
Flue, fittings and magnetic filter£230
Chemical flush and inhibitor£120
Smart thermostat (meets Boiler Plus)£150
Labour (one day, two engineers)£650
Total including VAT£2,400

That's very close to the 2026 median quote of about £2,300 for a standard combi replacement.

Example 2: converting an older system to a combi

A three-bedroom terrace has a regular boiler, a hot water cylinder in the airing cupboard and two tanks in the loft. The owners want a combi to free up space.

ItemCost
Combi boiler (mid to premium range)£1,500
Remove cylinder and loft tanks, cap and re-route pipework£600
New, larger gas pipe from the meter£250
Flue, filter, controls£400
Power flush of the whole system£450
Labour (two to three days)£1,200
Total including VAT£4,400

The power flush is the item most worth checking. If the radiators are in good condition, a chemical flush may be enough and could save a few hundred pounds.

Example 3: a larger home sticking with stored hot water

A four-bedroom house with two bathrooms used every morning keeps its cylinder but upgrades to a system boiler and a new unvented cylinder for better pressure.

ItemCost
System boiler£1,300
Unvented cylinder (fitted by a G3-qualified installer)£1,400
Remove loft tanks, new pipework, safety valves and discharge pipe£700
Controls, filter, flush£500
Labour (two to three days)£1,300
Total including VAT£5,200

It costs more than a combi, but it gives the household strong showers in two bathrooms at once – something a combi might not manage.

Comparing three quotes: a worked example

Here's how three genuine-looking quotes for the same like-for-like combi swap can differ, and what to look for. The figures are illustrative, but the pattern is very common.

Quote AQuote BQuote C
Price£1,950£2,450£3,300
BoilerBudget brand, 25kWMid-range brand, 30kWPremium brand, 30kW
Warranty5 years10 years (accredited installer)12 years (accredited installer)
System clean"Flush" (not specified)Chemical flush and inhibitorPower flush and inhibitor
Magnetic filterNot mentionedIncludedIncluded
ControlsBasic timer and thermostatSmart thermostatSmart thermostat with weather compensation
Gas pipe checkNot mentionedChecked on survey – OKChecked on survey – upgrade included
Making goodNot mentionedIncludedIncluded

At first glance Quote A is the bargain. But it doesn't mention a filter or making good, its controls may not meet the Boiler Plus requirement for combis, and "flush" could mean almost anything. Quote B covers everything and is close to the 2026 median. Quote C costs more but includes a longer warranty, better controls and a gas pipe upgrade the others may have missed. Ask Quote A to confirm everything in writing, and ask B and C why they reached different conclusions about the gas pipe – one of them may be wrong.

What happens on installation day

Knowing what to expect makes the day go more smoothly. For a typical like-for-like combi swap:

  1. The engineers arrive, check their paperwork against your home, and protect floors and furniture.
  2. They turn off the gas, water and electricity to the boiler, and drain the heating system.
  3. The old boiler and flue are removed, and the wall is prepared for the new mounting bracket.
  4. The new boiler, flue and filter are fitted, and pipework is adapted to the new connections.
  5. The system is refilled, cleaned with a chemical flush, drained again and refilled with inhibitor.
  6. Gas and electrics are reconnected, and the boiler is tested and commissioned – including a flue gas analysis and checks on gas pressure.
  7. Controls are set up, and the engineer shows you how to use them, how to top up the pressure and where the filter is.
  8. The Benchmark checklist is completed, and the job is notified to Building Control.

You'll usually be without heating and hot water for most of the day. Have a kettle ready, and if anyone in your home is vulnerable to the cold, plan ahead – especially in winter.

Signs your boiler is on its way out

It's usually cheaper and less stressful to replace a boiler on your own timetable than in an emergency in January. Watch for:

  • More than one breakdown in a year, or repeat visits for the same fault.
  • Pressure that keeps dropping, which can point to a leak.
  • Banging, gurgling or kettling noises that don't go away after bleeding the radiators.
  • A yellow or orange flame instead of a crisp blue one on older open-flue boilers – get it checked straight away.
  • Soot or staining around the boiler, or a CO alarm going off – stop using it and call for help.
  • Gas bills creeping up without any change in how you use your heating.

Is it worth repairing instead?

Not every broken boiler needs replacing. A failed part such as a pump, fan, diverter valve or printed circuit board can often be fixed for a few hundred pounds. Replacement starts to make sense when:

  • The boiler is more than 12 to 15 years old and parts are getting hard to find.
  • Repairs are adding up – as a rule of thumb, if a repair costs more than about a third of a new boiler, consider replacing.
  • It's an old non-condensing boiler, which wastes much more of the gas it burns than a modern condensing one.
  • The engineer has classed it as "At Risk" or "Immediately Dangerous".
  • Your home's needs have changed – a new bathroom, an extension or a loft conversion. If you're planning building work anyway, read how to choose a builder and time the boiler change to fit in with it.

If an engineer tells you a boiler is unsafe and needs replacing, it's sensible to get a second opinion before spending thousands – unless it's been classed as Immediately Dangerous, in which case it must not be used.

Oil, LPG and electric boilers

Millions of UK homes aren't connected to the gas grid, especially in rural Scotland, Wales, Northern Ireland, Cornwall, Norfolk and the uplands of northern England. If that's you, the options and costs are different – and it's worth looking for installers who know rural homes, such as heating engineers in Cornwall, Norfolk or Cumbria.

Oil boilers

Oil boilers are common in rural areas and in Northern Ireland, where most homes heat with oil. A replacement oil boiler typically costs more than a gas combi to buy and fit, and you may also need to budget for the tank: oil tanks generally last around 20 years and must meet regulations on position, bunding (a second skin to catch leaks) and distance from buildings and boundaries. Oil boiler work should be done by an OFTEC-registered technician, who can also self-certify the work under Building Regulations. Servicing usually costs a little more than for a gas boiler, around £100 to £200.

If you're replacing an oil boiler in England or Wales, it's worth getting a heat pump quote too: the higher £9,000 Boiler Upgrade Scheme grant for homes moving off oil or LPG runs until 31 March 2027.

LPG boilers

LPG (liquefied petroleum gas) boilers work much like natural gas boilers and are fitted by Gas Safe engineers qualified for LPG – check the back of the engineer's ID card. LPG usually costs more per unit of heat than mains gas, and many homes rent their tank from the supplier, so check your supply contract before changing anything.

Electric boilers

Electric boilers are compact, quiet and need no flue or gas supply, which makes them handy in flats where a gas flue isn't possible. They're cheaper to fit than gas boilers, but electricity costs several times as much per unit as gas, so running costs are usually much higher unless you have a cheap off-peak tariff or solar panels. For most houses, a heat pump is a far more efficient way to heat with electricity.

Grants and help with the cost

There's a lot of confusing advertising about "free boilers". Here is where things actually stand in late 2026.

Replacing a gas boiler with a new gas boiler

There is no general grant for this. The only scheme that has funded replacement gas boilers for some low-income households is ECO4, which the government extended to 31 December 2026, with no successor scheme of the same kind. Funding under ECO4 is limited and set by energy suppliers and their installers, and it is not available in Northern Ireland. If you think you might qualify, contact your energy supplier or your local council quickly, and be wary of cold callers claiming to offer "free boiler" grants.

Switching to a heat pump: the Boiler Upgrade Scheme

If you're in England or Wales and you replace a fossil-fuel heating system with a heat pump, the Boiler Upgrade Scheme takes money off the installation:

Boiler Upgrade Scheme (England and Wales)Grant
Air source or ground source heat pump£7,500
Heat pump replacing oil or LPG heating (from 21 July 2026 to 31 March 2027)£9,000
Air-to-air heat pump (added in 2026)£2,500
Biomass boiler (rural, off the gas grid)£5,000

The scheme has been extended to 2030. You don't apply yourself: your installer, who must be MCS certified, applies and takes the grant off your bill. Heat pumps installed in homes also currently have 0% VAT.

Scotland and Northern Ireland

In Scotland, the Home Energy Scotland Grant and Loan scheme offers homeowners a grant of up to £7,500 towards a heat pump, with an extra uplift for rural homes and an optional interest-free loan. Speak to Home Energy Scotland before you sign anything – you normally need their approval first. Northern Ireland has separate, smaller schemes run through the Housing Executive for qualifying households. You can find heating engineers in Edinburgh, Aberdeen, Belfast and County Antrim on the directory.

Paying monthly

Many installers offer finance. A 0% deal can be useful, but check the total amount payable, whether the boiler price is higher than the cash price, and what happens if you miss a payment. Paying a deposit by credit card can give you Section 75 protection (see below).

How to choose a boiler installer

The installer matters more than the brand. A premium boiler fitted badly will be noisy, inefficient and unreliable; a mid-range boiler fitted well can run happily for 15 years.

  1. Check they're Gas Safe registered. It's a legal requirement for anyone fitting a gas boiler. Ask for the licence number, check it on the Gas Safe Register website, and ask to see the engineer's ID card on the day. Our guide on how to check a Gas Safe engineer shows you exactly what to look for.
  2. Get at least three quotes. At least one should be from a local independent installer who visits your home, rather than an online-only quote.
  3. Make sure someone surveys the home. A quote given without looking at your system, flue route, gas pipe and water flow is a guess.
  4. Ask about accreditation. Many manufacturers give longer warranties when their boilers are fitted by accredited installers.
  5. Compare like with like. Line up each quote's boiler model, warranty, flush, filter, controls and making good.
  6. Ask who does the work. Will the person who quotes do the installation, or a subcontractor?
  7. Check reviews in detail. Look for comments about tidiness, timekeeping and how problems were handled.
  8. Get the final quote in writing, including the start date, how long it will take and how payment works.

Questions to ask every installer

  • Why are you recommending this type and size of boiler for my home?
  • Have you checked my gas pipe, flue route and water flow?
  • What kind of system clean is included, and is a power flush really needed?
  • Which controls are included, and do they meet Boiler Plus?
  • How long is the warranty, and what do I need to do to keep it valid?
  • Who registers the job with Building Control, and when will I get the certificate?
  • What's not included that might come up on the day?
  • How long will I be without heating and hot water?

Paying for a new boiler and your rights

Deposits

A deposit is normal for a boiler installation because the installer has to buy the boiler and parts. Keep it reasonable – often 10% to 25% – and avoid paying the full amount before the work is finished and you're happy.

Credit card protection

If you pay any part of a bill between £100 and £30,000 with a credit card, Section 75 of the Consumer Credit Act makes the card provider jointly responsible if the installer breaks the contract or goes out of business. Even paying a small deposit by credit card can give you protection over the whole contract.

Consumer law

Under the Consumer Rights Act 2015, an installation must be carried out with reasonable care and skill, and the boiler must be of satisfactory quality, fit for purpose and as described. If you sign a contract in your own home or online, you usually have 14 days to cancel under the Consumer Contracts Regulations – though if you ask for work to start sooner, you may have to pay for work already done.

If something goes wrong, raise it with the installer in writing first. If they're a member of a trade association or a Consumer Code, it may offer a dispute service, and Citizens Advice can explain your next steps.

Looking after your new boiler

A new boiler should last 10 to 15 years or more with proper care. Here's how to get the best from it:

  • Service it every year. A standard gas boiler service costs about £100 in 2026 (most people pay £80 to £120). Nearly every manufacturer requires an annual service by a Gas Safe engineer to keep the warranty valid.
  • Turn the flow temperature down. Many combis are set to run their radiators at 70°C or more. Turning the flow temperature down to around 55 to 60°C lets a condensing boiler condense properly and can cut gas use without making your home colder. Ask your installer to set it up on the day.
  • Insulate the condensate pipe if it runs outside. A frozen condensate pipe is one of the most common winter breakdowns.
  • Keep the pressure right. Most sealed systems should sit around 1 to 1.5 bar when cold. Learn how to top it up from the manual.
  • Bleed radiators if they're cold at the top.
  • Keep the paperwork – the Building Regulations certificate, Benchmark checklist and warranty – together in one place.

Heat pumps: should you consider one instead?

If your boiler is near the end of its life, it's worth at least asking whether a heat pump could work for your home. Heat pumps use electricity to move heat from the outside air or ground into your home, and they're eligible for the grants above.

They tend to work best in homes that are reasonably well insulated and can take larger radiators or underfloor heating, because they run at lower water temperatures than boilers. A proper heat loss survey by an MCS-certified installer will tell you whether it's realistic. Even if you decide on a gas boiler for now, keeping a hot water cylinder and choosing larger radiators where you're replacing them can make a future switch easier.

Ready to get quotes? Every installer you hire must be on the Gas Safe Register – our step-by-step guide shows how to check a Gas Safe engineer in under a minute. You can browse gas and heating engineers and plumbers near you, or pick your area from our locations page. If the new boiler needs a fresh electrical supply or a smart thermostat wired in, a local electrician can do that part – our electrician costs guide shows typical prices. A boiler swap can leave marks on walls and pipe boxing to tidy up, so a painter and decorator may be worth booking afterwards.

Frequently asked questions

How much is a new combi boiler fitted?

In 2026, a like-for-like combi boiler replacement typically costs £1,800 to £3,500 fitted, with a median quote of around £2,300 in one sample of 2,000 quotes. Premium boilers with long warranties can cost £3,000 to £4,500.

How much does it cost to switch from a regular boiler to a combi?

A conversion from a regular or system boiler to a combi usually costs £3,000 to £5,700, because the installer has to remove the cylinder and tanks, re-route pipework and often upgrade the gas pipe.

How long does it take to fit a new boiler?

A like-for-like combi swap usually takes one day. A conversion or a boiler move typically takes two to three days, and a full new central heating system can take a week.

Is there a grant for a new gas boiler?

Not for most people. The ECO4 scheme, which has funded some replacement boilers for low-income households, runs until 31 December 2026 with no direct successor. Grants are available if you switch to a heat pump: £7,500 through the Boiler Upgrade Scheme in England and Wales (£9,000 if replacing oil or LPG until March 2027), and up to £7,500 through Home Energy Scotland.

Do I need a power flush with a new boiler?

Your system must be cleaned and treated when a new boiler is fitted, and boiler warranties depend on it. That doesn't always mean a full power flush – a chemical flush can be enough for a system in reasonable condition. Ask the installer to explain why they're recommending one.

What size boiler do I need?

It depends on your home's heat loss and how much hot water you use at once, not just the number of bedrooms. Many two- to three-bedroom homes use a 24 to 30kW combi. A good installer will work it out for your home rather than recommend the biggest model.

How long do boilers last?

A well-maintained modern boiler typically lasts 10 to 15 years, and many go longer. Annual servicing, a clean system with a magnetic filter and sensible settings all help it last.

Who can install a gas boiler?

Only a Gas Safe registered engineer who is qualified for that type of work. It's illegal for anyone else to fit a gas boiler. Check the engineer's ID card and their registration on the Gas Safe Register website before work starts.

Can I fit a boiler I bought online?

Some installers will fit a boiler you've supplied, but many won't, and you may lose out on the installer's warranty or accredited extended warranty. Always agree it with the installer before you buy.

What happens if my new boiler breaks down under warranty?

Contact the manufacturer first – most warranties cover parts and labour if the boiler was installed correctly, registered on time and serviced every year. Keep your service records, as you'll usually be asked for them.

Should I replace my boiler before it breaks down?

If your boiler is over 12 to 15 years old, has needed repeated repairs or is a non-condensing model, planning a replacement makes sense. You can get quotes without pressure, pick a time of year when installers are less busy (spring and summer), and avoid days without heating in winter. If it's younger and reliable, an annual service is usually the better value.

What is the best time of year to replace a boiler?

Late spring and summer. Installers are busiest from October to February when breakdowns peak, so you'll have more choice of dates and may find prices a little more flexible in the warmer months. You'll also be without heating for a day when you won't miss it.

Do I need to tell anyone when I get a new boiler?

Your Gas Safe installer notifies Building Control for you, and you'll receive a Building Regulations Compliance Certificate. Tell your home insurer if your policy asks about heating systems, and register the boiler warranty with the manufacturer if your installer doesn't do it.

Sources

Related guides

Are you a local business?

Add your free listing in about a minute – we write it for you.

Create my listing preview