The short answer
Most plumbers in the UK charge somewhere between £40 and £70 an hour in 2026, with a typical figure of around £50 to £60. A full day usually costs £325 to £400, and if you need someone urgently at night or at the weekend you should expect a call-out fee of roughly £100 to £120 on top of a higher hourly rate. Small jobs such as fixing a dripping tap or unblocking a toilet usually land between £65 and £165 once everything is added up.
Those are national averages taken from several published 2026 price surveys (listed in the sources at the bottom of this page). Your own quote could be higher or lower depending on where you live, how urgent the job is, how easy it is to get to the pipework and whether parts are included. This guide breaks all of that down so you know what a fair price looks like before you pick up the phone.
Plumber hourly rates in 2026
The hourly rate is the number most people ask about first, and it is also the one that varies the most. Different surveys measure it in slightly different ways, but they all point to the same band.
| Source (2026) | Hourly rate | What it measured |
|---|---|---|
| Checkatrade cost guide | £40–£60, average £50 | Ballpark averages from its trade members |
| Gas Engineer Software | Average £58.57 | Prices set by more than 7,000 heating and plumbing firms using its software |
| WaterSafe | £40–£70 | Typical range for approved plumbers |
| Logic4training survey | £25–£110, average £58 | Survey of experienced plumbers it has trained |
The honest summary is that £50 to £60 an hour is normal for weekday work across most of the UK in 2026. A plumber charging £40 is not necessarily cheap and cheerful, and one charging £75 is not necessarily overcharging – the hourly figure tells you less than you might think, for reasons we will come to.
Why the hourly rate is only part of the story
A plumber who charges £45 an hour but takes three hours to do a job costs you more than one who charges £70 an hour and finishes in ninety minutes. Experience shows up in speed, in not needing a second visit, and in carrying the right parts on the van. That is why many experienced plumbers prefer to price by the job rather than by the hour, and why you should always compare total quotes rather than hourly rates.
Most plumbers also have a minimum charge, usually the first hour. If your job takes twenty minutes, you will normally still pay for a full hour. Some charge in half-hour blocks after the first hour; others round up to the next hour. It is worth asking which before they start.
Regional differences
Where you live makes a real difference. Published 2026 figures put London and the South East at roughly £65 to £105 an hour, compared with £45 to £75 for the rest of the country. The reasons are simple: higher living costs, parking charges and congestion charges, slower travel between jobs and more demand.
| Area | Typical 2026 hourly rate | Source |
|---|---|---|
| UK national range | £45–£75 | Whito, May 2026 |
| London | £65–£105 | Whito, May 2026 |
| UK outside London | £45–£80 | Trade2base, June 2026 |
| London and the South East | £70–£120 | Trade2base, June 2026 |
No survey we found publishes reliable figures for each region, so treat anything outside London as "around the national average" – a busy plumber in a small town can charge as much as a London firm if there is no one else nearby. Rural areas sometimes cost more than you would expect simply because of the travel involved.
The quickest way to get a feel for your own area is to look at who is actually working there. You can browse plumbers in London, Greater Manchester, Bristol, Edinburgh or Cardiff, or more rural counties such as Cumbria and Devon.
Day rates for bigger jobs
For work that takes most of a day – fitting a bathroom suite, replacing a hot water cylinder, moving pipework for a kitchen – plumbers usually switch to a day rate. Checkatrade gives an average of £350 (range £325 to £375), Gas Engineer Software's 2026 figures show £400, and the Logic4training survey found an average of £368.
A day rate usually works out cheaper than paying by the hour. At £55 an hour, eight hours would be £440; a day rate of £350 to £400 saves you some of that. In return, the plumber gets certainty that the day is booked.
Call-out fees and emergency plumbers
Call-out fees confuse a lot of people, so it helps to separate the two kinds.
A normal call-out fee is a charge for coming out to you at all. Many plumbers do not charge one for booked weekday work and simply start the clock when they arrive. Others charge a fixed fee that includes the first half hour or hour of work. Gas Engineer Software's data shows an average standard call-out fee of £86 among firms that charge one.
An emergency call-out fee applies when you need someone outside normal hours – evenings, nights, weekends and bank holidays – or straight away. Checkatrade puts the typical emergency call-out at £100 to £120, with an emergency hourly rate of £75 to £150 (average £100). Expect even more on Christmas Day or New Year's Eve.
| Emergency charge | Typical 2026 price |
|---|---|
| Emergency call-out fee | £100–£120 |
| Emergency hourly rate | £75–£150 (average around £100) |
| Out-of-hours uplift | Usually 1.5 to 2 times the normal rate |
| Bank holiday work | Often double time |
Is it really an emergency?
If water is pouring through a ceiling, a pipe has burst or your only toilet is overflowing, it is an emergency. If a tap is dripping, a radiator is cold or the shower is weak, it can almost always wait until a normal weekday appointment – and waiting could easily halve the bill.
Before you call anyone in a real emergency, do the following:
- Turn off the water at the stop tap. It is usually under the kitchen sink, but can be in a downstairs toilet, a garage, under the stairs or in a cupboard by the front door.
- Turn off the central heating and any water heaters so they don't run dry.
- If water is near electrics, light fittings or sockets, turn off the electricity at the consumer unit (fuse box) if it is safe to reach it, and keep away from wet switches.
- Open the cold taps to drain the system and take the pressure off the leak.
- Move valuables and catch what water you can with buckets and towels.
- Take photos of the damage for your insurer before anything is cleared up.
Doing this can turn a 2am emergency into a next-morning job, which saves the emergency surcharge entirely.
Typical prices for common plumbing jobs
Most people don't need a plumber for a day; they need one for a specific job. The table below brings together typical 2026 costs from published price guides. Prices include labour and normal parts unless shown otherwise, but not the cost of an expensive item you choose yourself, such as a designer tap or a new bath.
| Job | Typical 2026 price | Average | Time on site |
|---|---|---|---|
| Replace a basin tap | £50–£70 labour | about £65 | 30–60 minutes |
| Replace kitchen or bath taps | £80–£150 | about £115 | 1–2 hours |
| Fix a leak | £77–£250 | £100–£165 | 1–2 hours |
| Unblock a toilet | £70–£130 | about £100 | Under an hour |
| Toilet or cistern repair | £90–£160 | about £120 | 1–2 hours |
| Clear a blocked drain or sink | £70–£150 | about £94 | Under an hour |
| Repair a burst pipe | £100–£250 | about £141 | 1–3 hours |
| Shower pump repair | £150–£300 | about £225 | 2–3 hours |
| Replace a cold water cistern (tank) | £250–£350 | about £300 | Half a day |
| Fit a new bath (labour) | £250–£850 | about £405 | 1 day |
| Replace a hot water cylinder | £400–£600 labour | about £500 | 1 day |
| Plumbing for a full bathroom refit | £4,000–£6,000 total project | about £5,000 | 1–2 weeks |
Sources for these figures are listed at the bottom of the page. Treat them as a sense-check, not a fixed price: a "simple" tap swap can become a two-hour job if the old fittings are seized, and a leak hidden under floorboards takes far longer to find than one under a sink.
Why small jobs cost more than you'd expect
People are often surprised that a fifteen-minute washer change costs £70 or more. It helps to understand what goes into a small job from the plumber's side:
- Travel to and from your home, which can easily be 30 to 60 minutes of unpaid time.
- Parking, fuel and sometimes the Congestion Charge or ULEZ.
- Diagnosis – working out what is actually wrong takes skill, and it is the part you are really paying for.
- Carrying a van full of parts so most jobs can be finished on the first visit.
- Insurance, tools, training, vehicle costs and time spent quoting jobs that never go ahead.
That is why minimum charges exist. The good news is that you can make them work for you.
Worked examples: what you might actually pay
Here are four realistic scenarios using the typical 2026 rates above, so you can see how a final bill is built up. Part prices are illustrative. All assume a plumber who is not VAT registered unless stated.
Example 1: a dripping kitchen tap on a weekday
You book a local plumber for a Tuesday morning. They charge £55 an hour with a one-hour minimum and no call-out fee. The tap needs a new cartridge, which costs £18.
| Item | Cost |
|---|---|
| Labour (one-hour minimum) | £55 |
| Replacement cartridge | £18 |
| Total | £73 |
If the tap is old and the plumber recommends replacing it, a mid-range kitchen mixer tap might cost £60 to £120 to buy, plus about an hour and a half of labour – roughly £140 to £200 in total.
Example 2: a burst pipe on a Saturday night
A pipe under the bathroom floor bursts at 10pm on a Saturday. You turn off the stop tap but need the bathroom back. The emergency plumber charges a £110 call-out, then £100 an hour after the first hour.
| Item | Cost |
|---|---|
| Emergency call-out (includes first hour) | £110 |
| Second hour (lifting boards, repair) | £100 |
| Copper pipe and fittings | £25 |
| Total | £235 |
The same repair on a Monday morning might have cost £55 to £60 an hour with no call-out fee – around £135 to £145 in total. If it is safe to wait, waiting saves about £100.
Example 3: replacing a hot water cylinder
Your old copper cylinder is leaking. A plumber quotes for a like-for-like vented cylinder, with a day rate of £375. The cylinder costs £350 and fittings another £60.
| Item | Cost |
|---|---|
| Labour (one day) | £375 |
| New vented cylinder | £350 |
| Valves, fittings and insulation | £60 |
| Disposal of old cylinder | £0–£30 |
| Total | £785–£815 |
If you want an unvented cylinder instead (mains pressure hot water), the cylinder itself costs considerably more and the installer must hold a specific unvented qualification because the work is notifiable under Building Regulations – so expect the total to be well above the figure for a vented cylinder. Get at least three written quotes.
Example 4: a VAT-registered firm
Larger plumbing companies are usually VAT registered and must add 20% VAT to their invoices. Sole traders with a turnover under the VAT threshold (currently £90,000 a year) don't charge VAT at all. That means two quotes that look the same on paper may not be:
| Sole trader | VAT-registered firm | |
|---|---|---|
| Quoted price | £400 | £400 + VAT |
| VAT at 20% | £0 | £80 |
| You pay | £400 | £480 |
Always check whether a price is "including VAT" or "plus VAT". It is a fair question and a good plumber will answer it straight away.
What affects the price of a plumbing job
Two plumbers can look at the same job and give quite different quotes. Here are the main things that push a price up or down.
How urgent it is
The single biggest factor. Emergency and out-of-hours work typically costs 1.5 to 2 times the normal rate, plus a call-out fee. If you can wait for a normal appointment, you will almost always pay less.
Access to the pipework
Pipes behind tiles, under fitted kitchens, under floorboards or boxed in behind a bath panel take time to reach and put back. A plumber who has to lift a laminate floor or cut into a tiled wall will charge for that time, and the making-good (re-tiling, replastering) may need a different trade.
The age of your plumbing
Older homes often have a mix of copper, lead, iron and plastic pipework, with seized valves and non-standard sizes. That can turn a simple swap into a longer job. If your home still has lead pipes – common in houses built before about 1970 – a plumber may recommend replacing them, as lead can get into drinking water.
Parts and materials
Some plumbers include standard parts in their price; others add them separately with a mark-up. Either is fine, as long as you know which. If you buy your own taps or toilet, check with the plumber first – some won't guarantee parts they didn't supply, and you need to be sure the item is suitable and complete.
Where you live
As shown above, London and the South East sit well above the rest of the UK – roughly £20 to £30 an hour more at the middle of the range. Very rural areas may add travel time or mileage – a plumber based in Kendal covering the Lake District villages, for example, will often charge for the drive, while one in a city such as Derby has more customers close by.
Qualifications and memberships
Plumbers who belong to an approved scheme such as WaterSafe, or who also hold Gas Safe registration and unvented cylinder qualifications, can do a wider range of work and often charge more. For anything involving gas, the plumber must legally be on the Gas Safe Register – a plumber who isn't must not touch your boiler, gas fire or gas hob.
Plumber or heating engineer? Getting the right person
The words get used loosely, so it helps to know who does what.
| Job | Who you need |
|---|---|
| Leaks, taps, toilets, sinks, baths, showers | A plumber |
| Blocked drains outside the house | A drainage company or a plumber with drain equipment |
| Boiler repair, service or replacement | A Gas Safe registered heating engineer |
| Gas hob, gas fire or gas pipe work | A Gas Safe registered engineer qualified for that appliance |
| Unvented (mains pressure) hot water cylinder | A plumber with an unvented (G3) qualification |
| Radiators and central heating pipework | A plumber or heating engineer |
| Oil boiler | An OFTEC-registered technician |
| Heat pump | An MCS-certified installer (needed for the grant) |
Many plumbers are also Gas Safe registered heating engineers, so one person may cover everything. If you are unsure, tell them exactly what the job is when you call, and ask to see their Gas Safe ID card if any gas work is involved. Our guide on how to check a Gas Safe engineer explains the ID card in detail. For a whole new bathroom or kitchen, the plumbing is only one part of the job: you may also need kitchen and bathroom fitters, tilers, a plasterer and an electrician for lights, extractor fans and electric showers.
Who pays: you, your landlord or the water company?
Before you pay anyone, it is worth checking whether the problem is actually yours to fix.
If you rent
In England, landlords are legally responsible for keeping the water supply, sanitation (toilets, basins, baths, sinks) and installations for heating and hot water in repair and working order. If you rent and your boiler, toilet or pipework fails through no fault of yours, report it to your landlord in writing straight away rather than calling a plumber yourself. There are similar duties in Scotland, Wales and Northern Ireland. Only arrange your own repair if your tenancy agreement or landlord says you can, or you could end up paying. Landlords also have legal duties for gas and electrics – see how to check a Gas Safe engineer for the annual gas safety check and our electrician costs guide for the five-yearly EICR.
Pipes outside your home
Generally, you are responsible for the water supply pipe within your property boundary, and the water company is responsible for the pipe from the main up to your boundary (the communication pipe), including the stop tap in the pavement. If you see water bubbling up in the road or pavement, report it to your water company – it's free.
For drains and sewers in England and Wales, the rules changed in 2011: shared sewers and lateral drains that run outside your property boundary passed to the water companies. A blockage in a drain that only serves your home and lies within your boundary is usually yours; a blockage in a shared pipe, or one beyond your boundary, is usually the water company's to clear at no cost to you. Ring them first if you are not sure – it could save you a drainage bill.
Home insurance and home emergency cover
Buildings insurance often covers the damage caused by a burst pipe (the ceiling, floors and decorations) but not the cost of fixing the pipe itself, and many policies have an excess of £100 to £500 or more. Home emergency cover, sold as an add-on or by energy companies, may pay for an emergency plumber's call-out and labour up to a limit. Check your policy documents before calling anyone in a real emergency – some insurers insist you use their own approved contractors.
How to get a fair quote
Getting a sensible price is mostly about giving clear information and comparing like with like.
Describe the job properly
The more a plumber knows before they arrive, the more accurate the quote. When you contact plumbers, include:
- What the problem is, when it started and what you've already tried.
- Clear photos of the area, including any pipes, valves, labels on the boiler or cylinder, and access.
- The age and type of your home (for example, a 1930s semi or a 2010s flat).
- Whether you have a combi boiler, a hot water cylinder or a cold water tank in the loft.
- When you are available, and how urgent it really is.
Get at least three quotes for bigger jobs
For anything over a few hundred pounds, ask three local plumbers to quote. For small repairs, it is usually fine to ask for a clear price over the phone – most plumbers won't give a fixed price for a fault they haven't seen, but they should be able to tell you their call-out fee, hourly rate and minimum charge.
Know the difference between an estimate and a quote
An estimate is a best guess and the final bill can go up. A quote is a fixed price for the work described. For larger jobs, ask for a written quote that lists exactly what is included. If something unexpected comes up once work starts – a rotten joist under the bath, for example – a good plumber will stop and agree the extra cost with you before carrying on.
Compare the details, not just the total
When you have quotes in front of you, check:
- Is VAT included, or added on top?
- Are parts and materials included, and which brands or models?
- Is removing and disposing of the old item included?
- Is making good (filling holes, replacing tiles or boards) included or excluded?
- How long will the job take, and when can they start?
- What guarantee is given on the work – and on parts?
- Will they register any notifiable work (for example, an unvented cylinder) with Building Control?
- How and when do they want to be paid?
Paying a plumber: deposits, cash and your rights
Deposits
For small repairs, you would not normally pay anything up front. For larger jobs where the plumber needs to buy expensive parts (a cylinder, a bathroom suite), a deposit covering materials is reasonable – often 20% to 30%. Be wary of anyone who wants most of the money before starting, especially if they insist on cash.
Pay by card if you can
Paying by credit card gives you extra protection. Under Section 75 of the Consumer Credit Act, if you pay at least part of a bill between £100 and £30,000 on a credit card, the card provider is jointly liable if the trader breaches the contract or goes out of business. Debit card payments don't have Section 75 protection, but you may be able to ask your bank to reverse the payment through the chargeback scheme.
Your rights under consumer law
When you pay a trader for a service, the Consumer Rights Act 2015 says the work must be done with reasonable care and skill. If no price was agreed beforehand, you only have to pay a reasonable price, and if no time was agreed, the work must be done within a reasonable time. If the work is poor, you can ask the trader to put it right at no extra cost, and if they can't or won't, you may be entitled to a price reduction.
If you agree a contract in your own home – for example, a plumber quotes during a visit and you agree there and then – you usually have 14 days to cancel under the Consumer Contracts Regulations. If you want work to start within those 14 days, the trader should ask you to confirm that in writing, and you may have to pay for any work done if you then cancel.
Red flags when hiring a plumber
Most plumbers are honest, hard-working people. A few are not. Be cautious if you see any of these:
- They knock on your door unannounced saying they've noticed a problem.
- They won't give a call-out fee or hourly rate until they've arrived.
- They insist on cash, ask for full payment up front or want the money transferred to a personal account with a different name.
- They have no landline, no address and no online presence beyond a mobile number.
- They claim gas work is fine without a Gas Safe ID card, or the card is out of date.
- They pressure you to decide immediately ("this price is only for today").
- They find a long list of new, expensive problems once they're in your home and won't put anything in writing.
If you are ever unsure, it is perfectly reasonable to say you'll think about it, and to get a second opinion.
How to find a good local plumber
Recommendations from neighbours, friends and local social media groups remain one of the best ways to find a reliable plumber. A local directory also helps, because it lets you see who actually covers your area, how long they've been trading and how to contact them directly.
When you've got a shortlist:
- Check their website and reviews on more than one platform. Look for detailed reviews describing the type of work you need.
- Ask if they're a member of an approved plumber scheme such as WaterSafe, which lists plumbers trained in the water fittings regulations.
- For anything involving gas, check their Gas Safe registration online using the number on their ID card.
- Ask whether they have public liability insurance – most established plumbers carry £1 million to £5 million of cover.
- Get the price, or at least the call-out fee, hourly rate and minimum charge, in writing (a text or email is fine).
- Ask how long they guarantee their work for.
For gas work – boilers, gas hobs and fires – you need a Gas Safe registered engineer rather than a general plumber, so it is worth reading how to check a Gas Safe engineer and, if your boiler is on its way out, what a new boiler costs. You can find plumbers and gas and heating engineers by town, or browse every trade on our categories page.
Can I do it myself?
Plenty of small plumbing jobs are well within reach of a confident DIYer: bleeding radiators, changing a toilet seat, clearing a sink trap, re-sealing a bath or replacing a shower head. Others are not, and some are against the law to do yourself.
| Job | DIY-friendly? |
|---|---|
| Bleeding radiators, re-pressurising a combi boiler | Yes – follow the boiler manual |
| Clearing a sink trap or shower drain | Yes |
| Replacing a toilet flush valve or fill valve | Usually, if you're confident |
| Replacing a basin tap | Possible, but seized fittings can catch you out |
| Moving pipework or adding a new outside tap | Possible, but must meet water fittings regulations (including backflow protection) |
| Unvented hot water cylinders | No – needs a qualified installer, notifiable work |
| Anything involving gas | No – it is illegal unless you are Gas Safe registered |
If you do attempt a job yourself, know where your stop tap is before you start, and turn the water off. A small mistake with a compression fitting can cause a lot of damage very quickly, and many home insurance policies will look closely at DIY work if you claim.
Keeping future plumbing bills down
A little maintenance prevents a lot of call-outs:
- Find your stop tap now, label it and check it turns. A seized stop tap makes every emergency worse.
- Lag pipes in lofts, garages and outside walls before winter. Frozen pipes are a common cause of bursts.
- Disconnect hoses from outside taps in autumn and fit an insulated cover.
- Keep fat, oil and grease out of the sink, and don't flush wet wipes – even "flushable" ones are a common cause of blocked drains.
- Fit a hair catcher in showers and baths.
- Have your boiler serviced once a year by a Gas Safe registered engineer – heating engineers in Somerset, Kent and Hampshire are among the areas listed on the directory.
- Fix drips early: a dripping hot tap wastes water and energy, and drips stain sanitaryware.
- If you go away in winter, leave the heating on low or use the frost setting.
When is the best time to book a plumber?
Plumbers are busiest in the first cold snaps of winter, when frozen and burst pipes, failed boilers and cold radiators all arrive at once. Waiting times stretch and emergency rates kick in more often. Late spring and summer are usually quieter, which makes them the best time for planned work such as replacing a cylinder, moving a radiator or fitting a new bathroom – you are more likely to get your preferred dates, and some firms are happy to sharpen their price to fill the diary.
For non-urgent repairs, booking a mid-week morning slot gives the plumber the best chance of collecting any parts the same day. Friday afternoon bookings are more likely to roll into the following week if a part has to be ordered.
Frequently asked questions
How much does a plumber charge per hour in the UK?
In 2026, most UK plumbers charge between £40 and £70 an hour, with £50 to £60 being typical for weekday work. In London and the South East, rates of £65 to £105 an hour are common. Emergency and out-of-hours rates are usually higher, around £75 to £150 an hour.
How much is a plumber's call-out fee?
Many plumbers don't charge a call-out fee for normal weekday appointments. Those that do usually charge around £80 to £90, often including the first half hour or hour of work. Emergency call-out fees for evenings, nights and weekends are typically £100 to £120.
What is a plumber's day rate?
The average plumber's day rate in 2026 is roughly £350 to £400. Day rates are used for bigger jobs such as fitting a bathroom or replacing a cylinder, and usually work out cheaper than paying by the hour.
Do plumbers charge VAT?
Only if they are VAT registered. Sole traders whose turnover is under the VAT threshold (£90,000 a year) don't charge VAT. Larger firms must add 20%. Always check whether a quote is including or plus VAT.
Do plumbers charge for quotes?
Most plumbers give free quotes for planned work such as bathroom installations. Some charge for a visit to diagnose a fault, because finding the problem is skilled work in itself. Ask when you book.
How much does it cost to fix a leak?
A typical leak repair costs about £77 to £250 in 2026, with most bills landing around £100 to £165. A leak under a sink is quick; a hidden leak under floors or behind tiles takes longer to find and may need making good afterwards.
Is it cheaper to pay a plumber by the hour or by the job?
For small, clear-cut jobs, a fixed price per job gives you certainty. For bigger jobs, a day rate is usually better value than an hourly rate. What matters most is the total price for the finished job, so compare complete quotes rather than hourly rates.
Can a plumber work on my boiler?
Only if they are also on the Gas Safe Register and qualified for that type of appliance. It is illegal for anyone else to work on gas appliances. Ask to see their Gas Safe ID card and check the back shows the right qualification.
Who is responsible for a leak outside my house?
Usually the water company is responsible for pipes up to your property boundary, and you are responsible for the supply pipe within your boundary. If you see a leak in the street or pavement, report it to your water company for free.
What should I do while I wait for an emergency plumber?
Turn off the water at the stop tap, switch off the heating and any water heaters, turn off the electricity if water is near electrics and it is safe to do so, open the cold taps to drain the system, and move anything valuable away from the water.
Sources
- Checkatrade – Plumber costs in the UK: 2026 price guide (hourly and day rates, emergency charges, leak and toilet costs)
- Checkatrade – Plumber call-out charges 2026
- Gas Engineer Software – Gas engineer and plumber rates in 2026 (sample of 7,000+ firms: labour rate, call-out fees, job averages)
- WaterSafe – How much does a plumber cost? 2026
- Logic4training – How much do plumbers charge per hour? (June 2026) (job price table)
- Whito – UK plumber marketing data report, May 2026 (regional hourly rates)
- Trade2base – Plumbing pricing guide UK 2026 (London and outside-London rates, out-of-hours uplift)
- GOV.UK – VAT registration threshold
- Citizens Advice – Getting problems with services put right
- Gas Safe Register – Check an engineer