The short answer
Most electricians in the UK charge £45 to £60 an hour in 2026, with £50 a typical figure outside London. A full day usually costs £300 to £400, and an emergency electrician at night or at the weekend is more likely to charge £80 to £100 an hour. Small jobs such as swapping a socket or fitting a new light usually come in at £55 to £120 once the minimum charge is included.
Bigger jobs are where the money really goes. A new fuse box (consumer unit) typically costs around £450 to £800, an electrical safety report (EICR) roughly £120 to £350 depending on the size of your home, and a full rewire of a three-bedroom house about £5,500 to £8,000 outside London.
Those figures are national averages from several published 2026 price surveys, all listed in the sources at the bottom of this page. Your own quote could be higher or lower depending on where you live, the age of your wiring, how easy it is to reach and whether parts are included. This guide breaks all of that down, explains the certificates and rules you need to know about, and shows you what a fair price looks like before you book.
Electrician hourly rates in 2026
The hourly rate is the first number most people ask about. The main 2026 price surveys measure it slightly differently, but they land in a very similar place.
| Source (2026) | Hourly rate | Notes |
|---|---|---|
| Checkatrade cost guide (May 2026) | £45–£60, average about £50 | Ballpark averages from its trade members |
| MyBuilder price guide | About £45, up to £60 | Higher end in London and the South East |
| Fantastic Services (2026) | £40–£60 | £55–£75 in London and the South East |
| HaMuch (2026) | £40–£70 | Before materials and VAT |
The honest summary is that £45 to £60 an hour is normal for weekday domestic work across most of the UK. An electrician charging £40 isn't necessarily cutting corners, and one charging £70 isn't necessarily overcharging – especially in a city, or if they're VAT registered.
Why the hourly rate is only part of the story
An electrician who charges £45 an hour but takes three hours to trace a fault costs you more than one who charges £65 and finds it in forty minutes. Experience shows up as speed, as testing done properly the first time, and as having the right parts in the van. That's why many electricians price jobs as a fixed sum rather than by the hour, and why you should always compare the total price for the finished job, including testing and certificates, rather than the hourly rate.
Most electricians also have a minimum charge, usually the first hour. HaMuch puts the typical first hour or minimum call-out at £60 to £120 in 2026. So if your job takes fifteen minutes, you'll usually still pay for the first hour. It's worth asking how they charge after that – some bill in half-hour blocks, others round up to the next hour.
Regional differences
Where you live makes a real difference. London and the South East consistently come out top in every 2026 survey, typically £55 to £75 an hour against £40 to £60 elsewhere. Travel time, parking and congestion charges, higher overheads and strong demand all push prices up. Rural areas can sometimes be cheaper per hour but may come with a travel charge if you're outside an electrician's normal patch. To see who's working near you, browse electricians in London, Birmingham, Manchester, Leeds or Edinburgh, or county-wide in Surrey, Lancashire and North Yorkshire.
| Area | Typical 2026 hourly rate | Source |
|---|---|---|
| Most of the UK | £40–£60 | Fantastic Services |
| London and South East | £55–£75 | Fantastic Services |
| UK average | About £50 | Checkatrade |
The same pattern shows up in job prices. MyJobQuote's real-quote data puts the average house rewire at about £8,100 in London, compared with roughly £5,500 to £5,600 in Edinburgh and Nottingham.
Day rates for bigger jobs
For work that takes most of a day or longer – a rewire, a new kitchen's electrics, a garden room supply – electricians usually quote a day rate or a fixed price for the whole job. Checkatrade puts the average electrician day rate at about £400 based on an eight-hour day, while Logic4training's 2026 survey of working electricians found an average day rate of around £312. Fantastic Services gives a range of £220 to £400 outside London and £300 to £450 in London and the South East.
A day rate usually works out cheaper than paying hour by hour, and it gives you more certainty. Bigger jobs are often quoted as a total price, made up of labour days plus materials, certificates and any building control fees.
Emergency electricians and call-out fees
If your power has gone and it isn't a network fault, or you can smell burning from a socket, you may need someone fast. Expect to pay more for that. Checkatrade puts the typical emergency rate at around £90 an hour, with most urgent call-outs between £80 and £100 an hour. HaMuch's 2026 figures for out-of-hours work run from £80 up to £150 an hour, and fault finding on a first visit is often a fixed £80 to £200.
Emergency rates apply to evenings, weekends, bank holidays and overnight work. The fee usually covers getting to you and the first hour – parts and further time go on top.
Is it really an emergency?
Before calling out an electrician at midnight, it's worth running through some quick checks. Many "no power" situations can be sorted, or at least made safe, without a call-out:
- Check your neighbours. If their lights are off too, it's a power cut. Call 105 – the free national number for power cuts in England, Scotland and Wales – to report it to your local network operator. In Northern Ireland, contact NIE Networks. An electrician can't fix a network fault. If you have no hot water as well, it may be the boiler rather than the electrics – see what a new boiler costs and call a heating engineer.
- Look at your consumer unit. If a switch (an RCD or circuit breaker) has flipped to "off", something has tripped it. Unplug everything on that circuit, then try switching it back on. If it stays on, plug things back in one at a time – the one that trips it again is usually the culprit.
- If it keeps tripping straight away with nothing plugged in, leave it off and book an electrician – there may be a fault in the fixed wiring.
- Pre-payment meter? Check you haven't run out of credit or emergency credit.
You do need someone urgently if there's a burning smell, scorch marks, buzzing or crackling from sockets or the fuse box, sparks, or water getting into electrics. Switch off at the main switch if it's safe to do so, keep away from anything wet, and call an emergency electrician. If there's smoke or fire, get out and call 999.
Typical prices for common electrical jobs
These are typical 2026 UK prices for common household jobs, labour and standard materials included unless stated. London and the South East usually sit at the top of each range or above it.
| Job | Typical 2026 price | Source |
|---|---|---|
| Replace a socket (like for like) | £55–£75 (average £65) | Checkatrade |
| Add a new socket (new cable or spur) | £100–£200 | Fantastic Services |
| Replace a light fitting | £55–£75 (average £65) | Checkatrade |
| Downlights for one room | £300–£700 | Best Builders |
| Outdoor socket | £150–£250 | Less.co.uk |
| Mains-wired smoke alarm | £60–£120 per alarm | Trade2base |
| Electric shower fitting (labour only) | £250–£400 (average £325) | Checkatrade |
| Fault finding (first visit) | £80–£200 | Fantastic Services |
| New consumer unit (fuse box) | £450–£800 (average £625) | Checkatrade |
| EICR safety report | £120–£350 | Fantastic Services, MyJobQuote |
| Home EV charger, fitted | £800–£1,200 | Fantastic Services |
| Full house rewire | £3,900–£10,000 (average £6,950) | Checkatrade |
We cover the big-ticket items – fuse boxes, EICRs, rewires and EV chargers – in more detail below.
Why small jobs cost more than you'd expect
Paying £65 to swap one socket can feel steep for a few minutes' work, but the price covers more than the screwdriver time. There's travel, parking, the minimum charge, the part itself, isolating and testing the circuit afterwards, and the paperwork. A good electrician tests a circuit after working on it, and that takes time and expensive test equipment.
Small jobs are also where you'll see the biggest differences between quotes, because the fixed costs of turning up are spread over so little work.
New fuse box (consumer unit) costs
The consumer unit is the box, usually near your meter, that holds your main switch, circuit breakers and RCDs (the safety switches that cut the power if electricity leaks to earth – for example through a person). Older homes may still have a fuse box with rewirable fuses and no RCD protection at all.
Published 2026 prices for replacing one are fairly consistent:
| Source (2026) | Typical price | Notes |
|---|---|---|
| Checkatrade | £450–£800, average £625 | Replacing a fuse box |
| Checkatrade | About £485 | Populated 10-way RCBO board, fitted |
| MyJobQuote | £350–£850, average £525 | Most homes need a 10-circuit unit (£480–£640) |
| Fantastic Services | £450–£750 | £700–£1,200 in London |
A replacement usually takes four to eight hours, and your power will be off for most of it. The price normally includes the new unit, fitting, testing every circuit and the certificate.
Why consumer unit quotes vary
- The type of board. A board where each circuit has its own combined breaker and RCD (an RCBO board) costs more than one where groups of circuits share an RCD, but a single fault trips only one circuit instead of half the house.
- Surge protection. Most new boards now include a surge protection device, which adds to the price.
- Problems found during testing. When an electrician changes the board, they must test every circuit. If an old circuit fails – a common reason is a fault that the old fuses never noticed – it has to be fixed before the new board can be signed off. That's the most common reason a "£600 job" turns into a bigger bill.
- Earthing and bonding. If the main earth or the bonding to your gas and water pipes doesn't meet current standards, it will need upgrading at the same time.
Replacing a consumer unit is notifiable work under the Building Regulations in England and Wales (more on that below), so you should always receive a certificate afterwards.
EICR costs: the electrical safety report
An Electrical Installation Condition Report (EICR) is a thorough inspection and test of the fixed wiring in a property – the cables, sockets, switches, light fittings and consumer unit. It's sometimes called a "landlord safety certificate" or a "periodic inspection". It doesn't cover plug-in appliances; that's PAT testing, a separate job.
How much does an EICR cost?
| Property | Typical 2026 price | Source |
|---|---|---|
| Flat | £120–£200 | Fantastic Services |
| House | £200–£350 | Fantastic Services |
| London | £250–£400 | Fantastic Services |
| UK range | £120–£300 | MyJobQuote |
| UK average | About £212.50 | Checkatrade |
The price depends mostly on the number of circuits and the size of the property. An inspection typically takes two to four hours for an average home.
What the codes on your report mean
The electrician will list anything that falls short of the current wiring rules (BS 7671, known as the 18th Edition Wiring Regulations) and give each item a code:
| Code | Meaning | What happens next |
|---|---|---|
| C1 | Danger present – risk of injury | Made safe straight away, often before the electrician leaves |
| C2 | Potentially dangerous | Must be put right for a "satisfactory" report |
| FI | Further investigation needed | Must be investigated without delay |
| C3 | Improvement recommended | Not a fail – but worth doing when you can |
Any C1, C2 or FI means the report is unsatisfactory. C3s on their own don't make a report fail.
How often do you need an EICR?
- Homeowners aren't legally required to have one, but a check roughly every ten years, and whenever you buy a property, is widely recommended. It's well worth doing before buying an older home – the result can be used to negotiate the price, alongside a survey and a quote for any roof repairs.
- Landlords in all four UK nations must now have one at least every five years. The details differ by nation – see the next section.
- Your report may say sooner. The inspector can recommend a shorter interval if the installation is in poor condition.
Landlord electrical safety rules in England, Scotland, Wales and Northern Ireland
Every UK nation now requires private landlords to have the electrics checked by a qualified person at least every five years. Here's how the rules compare.
| Nation | The law | What landlords must do |
|---|---|---|
| England | Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 | EICR at least every 5 years; copy to tenants and council; fix problems within 28 days or sooner |
| Scotland | Repairing Standard (since 1 December 2015) | Electrical safety inspection at least every 5 years, plus checks on appliances the landlord supplies |
| Wales | Renting Homes (Fitness for Human Habitation) (Wales) Regulations 2022 | Test the installation at least every 5 years; give the report to contract-holders within 14 days |
| Northern Ireland | Electrical Safety Standards for Private Tenancies Regulations (NI) 2024 | Inspection at least every 5 years – new tenancies from 1 April 2025, all private tenancies from 1 December 2025 |
England in more detail
Under the 2020 regulations, which have applied to all private tenancies in England since April 2021, a landlord must:
- Have the electrical installation inspected and tested by a qualified and competent person at least every five years (or sooner if the last report says so)
- Give a copy of the report to each existing tenant within 28 days of the inspection
- Give a copy to new tenants before they move in
- Give a copy to the local council within 7 days if it asks for one
- Carry out any remedial work or further investigation within 28 days, or sooner if the report says so
- Get written confirmation that the work has been done and send it to the tenant and the council within 28 days
Councils can fine landlords up to £30,000 for breaching the 2020 regulations. Since 1 May 2026, the Renters' Rights Act 2025 has also raised the maximum civil penalty for many housing offences in England to £40,000 and given councils stronger enforcement powers, so the stakes have gone up. Check your council's private housing pages or GOV.UK for the exact figure that applies to your case. Landlords also need an annual gas safety check – our guide on how to check a Gas Safe engineer covers that side.
House rewiring costs
A full rewire means replacing all the cables, sockets, switches, light points and usually the consumer unit. It's the biggest electrical job most homeowners will ever pay for.
Rewire cost by property size
| Property | Most of the UK | London and South East |
|---|---|---|
| 2-bed house or flat | £3,500–£5,500 | £4,200–£6,800 |
| 3-bed house | £5,500–£8,000 | £6,500–£10,000 |
| 4-bed house | £8,500–£12,000 | £10,000–£15,000 |
Source: Fantastic Services 2026 rewiring guide (figures include VAT).
Other 2026 surveys agree. Checkatrade gives a range of £3,900 to £10,000 with an average of about £6,950, and MyJobQuote's real-quote data puts the average London rewire at about £8,100, Manchester at about £6,500 and Edinburgh at about £5,500.
How long does a rewire take?
MyJobQuote puts most full rewires at three to seven days, with larger homes taking longer. A rewire is done in two stages:
- First fix – lifting floorboards, cutting channels ("chases") in walls and running new cables to every socket, switch and light position. This is the messy part, and it's much easier in an empty house.
- Second fix – fitting the sockets, switches, light fittings and consumer unit, connecting everything up, then testing every circuit and issuing the certificate.
After that you'll usually need plastering and redecorating, which are rarely included in an electrician's price. Budget for a plasterer and decorator, or ask whether the electrician can recommend one. If the rewire is part of a bigger renovation, a builder can coordinate all the trades.
What pushes the price of a rewire up
- Living in the house while it's done. Working around furniture and people takes longer than working in an empty shell. A rewire before you move in, or alongside a full renovation, is cheaper and far less disruptive.
- Solid walls and concrete floors. Older stone or solid brick walls, and solid floors, make running cables slower.
- Extra points. Most people want more sockets than the house had in the 1970s – every extra double socket, USB socket, data point or outside light adds to the bill.
- Higher-spec fittings. Basic white sockets and switches are usually included; brushed steel or brass fittings cost extra.
- Smoke alarms and extras. A rewire is the ideal time to add interlinked mains smoke and heat alarms, outside lights, an EV charger supply or garden power.
Signs your house may need rewiring
- Rubber, fabric or lead-sheathed cables (common in homes wired before the 1960s)
- An old fuse box with rewirable fuses and no RCDs
- Round-pin or brown Bakelite sockets and switches, or sockets on skirting boards
- Lights that flicker, fuses that blow regularly, or sockets that get warm
- No sockets in a kitchen or too few anywhere, so the house runs on extension leads
- An EICR that recommends a rewire
As a rough rule, wiring that's more than 25 to 30 years old is worth having inspected. Age alone doesn't mean it needs replacing – modern PVC cable can last much longer – but an EICR will tell you.
Partial rewires
You don't always need to rewire everything. If an EICR shows that most of the wiring is sound but one area – often the kitchen, an extension or a loft conversion – is a problem, a partial rewire of just those circuits can save thousands. It's usually priced room by room or circuit by circuit.
EV charger installation costs
A home EV charger typically costs £800 to £1,200 fitted in 2026, according to Fantastic Services. The price depends mainly on the charger you choose and how far the installer has to run a cable from your consumer unit to the parking spot. A long run, a cable through a garage, or an upgrade to your main fuse or consumer unit will all add to the bill.
Is there a grant?
Government chargepoint grants are now aimed at people who can't use the standard driveway route. Since 1 April 2026, the grant for renters and flat owners is worth up to £500 per socket (up from £350), and there's a separate grant for households with on-street parking at the same rate. Both have been extended until 31 March 2027. Homeowners in houses with their own driveway are no longer eligible. Many EV charger installers also cover rural counties where home charging matters most, such as Cornwall, Devon, Norfolk and Somerset.
You need to use an installer approved under the government scheme, and if you rent or live in a flat you'll need permission from your landlord or freeholder first. Check the current rules on GOV.UK before you book, as the scheme closes in March 2027.
Part P: building regulations and certificates
In England and Wales, electrical work in homes must meet Part P of the Building Regulations. Some jobs are "notifiable", which means the local council's building control must be told about them. In broad terms, notifiable work is:
- Installing a new circuit (for example for an electric shower, cooker, EV charger or garden room)
- Replacing a consumer unit
- New work or alterations in a room with a bath or shower, within the special zones around it
Smaller jobs – replacing a socket, switch or light fitting like for like, or adding a socket to an existing circuit outside a bathroom – are not usually notifiable. They must still be done safely and to the wiring rules.
The three ways to get notifiable work signed off
- Use a registered electrician. An electrician registered with a government-approved competent person scheme can self-certify their own work. They'll tell your council for you (normally within 30 days of finishing) and you'll get a Building Regulations compliance certificate. This is by far the easiest route and costs you nothing extra.
- Use a registered third-party certifier. An installer who isn't in a scheme can arrange for a registered third-party certifier to inspect and test the work.
- Apply to building control yourself. You submit a building notice to your council before the work starts and pay its fee. The council then inspects the work.
The best-known schemes are NICEIC and NAPIT, and you can check whether an electrician is registered on the scheme's website or on the Electrical Competent Person register.
Scotland and Northern Ireland
Part P doesn't apply in Scotland, where electrical work falls under the Scottish building standards. Bigger jobs may need a building warrant, and work can be certified by an approved certifier of construction – Scotland's main electrical trade body is SELECT, and NICEIC and NAPIT also operate there. In Northern Ireland, building control is run by the local councils, and the wiring rules in BS 7671 still apply.
Which certificate should you get?
| Certificate | When you get it |
|---|---|
| Electrical Installation Certificate (EIC) | New installations, new circuits, consumer unit changes and rewires |
| Minor Electrical Installation Works Certificate | Small additions or changes to an existing circuit, such as an extra socket |
| Building Regulations compliance certificate | Notifiable work done by a scheme member (sent by the scheme) |
| Electrical Installation Condition Report (EICR) | An inspection of an existing installation |
If an electrician says a certificate "isn't needed" for a new circuit or consumer unit, find another electrician.
Worked examples: what you might actually pay
These examples are illustrative, built from the 2026 averages above. They show how a final bill is put together – your quotes will vary.
Example 1: two extra sockets and an outside light (weekday)
| Item | Illustrative cost |
|---|---|
| Two new double sockets from an existing circuit | £200–£300 |
| Outside light with sensor, new cable | £150–£250 |
| Testing and minor works certificate | Usually included |
| Total | £350–£550 |
Done in one visit, that's roughly a half to a full day. Booked as three separate jobs, you could pay the minimum charge three times.
Example 2: replacing an old fuse box in a three-bed semi
| Item | Illustrative cost |
|---|---|
| 10-way consumer unit with RCBOs and surge protection, fitted | £550–£750 |
| Upgrading the main earth and bonding to gas and water pipes | £100–£200 (if needed) |
| Fixing one faulty circuit found during testing | £80–£200 (if needed) |
| Total | £550–£1,150 |
The lower end assumes everything tests fine; the higher end allows for the extras that often turn up.
Example 3: landlord's EICR on a two-bed flat
| Item | Illustrative cost |
|---|---|
| EICR inspection and report | £120–£200 |
| Replace a damaged socket (C2) | £55–£75 |
| Add missing bonding (C2) | £80–£150 |
| Total | £255–£425 |
Ask for the remedial work to be quoted at the same time as the inspection so you can get everything done within the 28-day deadline.
Example 4: full rewire of a three-bed house you're moving into
| Item | Illustrative cost |
|---|---|
| Full rewire including consumer unit (empty house) | £5,500–£8,000 |
| Extra sockets, USB points and outside lights | £300–£800 |
| Interlinked mains smoke and heat alarms | £250–£500 |
| Plastering and making good (separate trade) | £1,000–£2,500 |
| Total | £7,050–£11,800 |
The plastering figure is a rough allowance – get a separate quote, as it depends heavily on how many walls are chased and how much ceiling has to be repaired.
What affects the price of electrical work
How urgent it is
Evenings, weekends and bank holidays cost more – often close to double the weekday hourly rate. If it's safe to wait, booking a weekday slot will save money.
The age and condition of your wiring
New work has to connect to what's already there. If the existing wiring is old or faulty, the electrician may have to fix that first before they can sign off the new work.
Access
Lifting carpets and floorboards, working in tight lofts, or chasing into solid walls all take time. Clear access – furniture moved, lofts boarded and a clear path to the consumer unit – helps keep the bill down.
Parts and materials
Sockets, switches and light fittings vary hugely in price. Ask whether the quote uses standard white fittings and what an upgrade would cost. If you're supplying your own fittings, check the electrician is happy to fit them – some won't guarantee parts they didn't supply.
Testing and certification
A proper quote includes testing and the certificate. A very cheap quote that leaves those out isn't a bargain – it means the work hasn't been checked.
VAT
Electricians whose turnover is under the VAT threshold (£90,000 a year) don't charge VAT. Larger firms must add 20%. Always check whether a quote is "including VAT" or "plus VAT", as it makes a big difference on a rewire.
How to get a fair quote
Describe the job properly
The more detail you give, the more accurate the price. Include:
- What you want done, room by room, and how many sockets, lights or points
- The age of the property and when it was last rewired, if you know
- A photo of your consumer unit (with the cover on) – electricians can tell a lot from it
- Any recent EICR, and whether the house will be empty or lived in
- Your postcode and when you'd like the work done
Get at least three quotes for bigger jobs
For anything over a few hundred pounds – a fuse box, a rewire, an EV charger – get at least three written quotes. Be suspicious of any price far below the others; it usually means something has been left out.
Know the difference between an estimate and a quote
An estimate is an educated guess and can change. A quote is a fixed price for the job described. For bigger work, ask for a written quote that lists what's included and what would count as an extra, such as faults found during testing.
Compare the details, not just the total
When you line quotes up side by side, check:
- Is testing and the certificate included?
- Will they notify building control (for notifiable work)?
- Which consumer unit and fittings are included?
- Is making good (filling chases, refitting floorboards) included?
- Is VAT included?
- What guarantee do they give on their work?
- When can they start, and how long will it take?
Paying an electrician: deposits, cash and your rights
Deposits
For small jobs, you'll normally pay when the work is done. For bigger jobs such as a rewire, a deposit to cover materials is reasonable, often 10% to 25%. Be wary of anyone asking for most of the money up front.
Pay by card if you can
Paying by credit card gives you extra protection: for anything costing between £100 and £30,000, the card company is jointly responsible if something goes wrong under Section 75 of the Consumer Credit Act. Bank transfer is fine with a firm you trust – just make sure you have an invoice with the business name and address.
Your rights under consumer law
Under the Consumer Rights Act 2015, a trader must carry out a service with reasonable care and skill, at a reasonable price if none was agreed, and in a reasonable time. If the work isn't up to standard, you can ask them to put it right at no extra cost.
Red flags when hiring an electrician
- No certificate offered for a new circuit, consumer unit or rewire
- Not registered with a competent person scheme but doing notifiable work, with no plan to involve building control or a third-party certifier
- Cash only, no invoice and no business address
- Pressure to decide on the spot, or "this price is only for today"
- Alarmist EICRs with long lists of expensive faults, especially on newer installations
- Large up-front payments before any work or materials
- Unmarked vans and no landline or address – hard to trace if anything goes wrong
- Vague quotes that don't say what's included
How to find a good local electrician
Recommendations from neighbours, friends and local social media groups are still one of the best ways to find a reliable electrician. A local directory helps too, because it shows you who actually works in your area and how to contact them directly.
When you've got a shortlist:
- Check their website and reviews on more than one site. Look for reviews that describe the type of job you need.
- Check they're registered with a competent person scheme such as NICEIC or NAPIT if your job is notifiable – you can search the scheme registers online.
- Ask whether they have public liability insurance. Most established electricians carry at least £1 million of cover.
- Get the price, or at least the hourly rate, minimum charge and what's included, in writing – a text or email is fine.
- Ask what certificate you'll get when the job is done.
- Ask how long they guarantee their work for.
Electrical work often goes hand in hand with other trades. A new boiler needs an electrician to wire in the controls; if you're planning a new bathroom or kitchen, our guide to plumber costs covers the other half of the job. For extensions and renovations, read how to choose a builder. You can find electricians by town or county, browse every location, or see every trade on our categories page.
Can I do electrical work myself?
The law in England and Wales doesn't ban DIY electrical work, but it does require it to be safe and to meet the Building Regulations. Notifiable work done by a non-registered person – including a competent DIYer – must be signed off by building control or a registered third-party certifier, and that usually costs more than hiring a registered electrician in the first place.
Realistically, the safe DIY jobs are limited to things like changing a light bulb, resetting a tripped breaker, replacing a fuse in a plug, and plugging in smart devices. Even a like-for-like socket swap needs the circuit isolated and tested afterwards. Electrical Safety First, the UK's electrical safety charity, recommends using a registered electrician for any work on fixed wiring.
Keeping future electrical bills down
- Have an EICR when you buy. It tells you what needs doing before you're stuck with a surprise bill, and it can be used to negotiate.
- Plan ahead. Add sockets, outside lights and data points while walls are open during a renovation, not afterwards.
- Bundle small jobs into one visit.
- Avoid daisy-chaining extension leads. Overloaded leads and adaptors are a common fire risk – more sockets in the right places is a better long-term fix.
- Test your RCDs. Press the "T" test button on each RCD every few months. It should trip and switch back on. If it doesn't, book an electrician.
- Keep your certificates together in one place.
When is the best time to book an electrician?
Weekday daytime slots are cheapest. For big jobs such as rewires, book well ahead – good electricians are often booked up several weeks in advance, particularly in spring and summer when renovation work peaks. If you're buying a home that needs rewiring, try to have the work done between completion and moving in, while the house is empty.
Frequently asked questions
How much does an electrician charge per hour in the UK?
Most UK electricians charge £45 to £60 an hour in 2026, with around £50 typical outside London. Rates in London and the South East are higher, usually £55 to £75 an hour. Emergency and out-of-hours work typically costs £80 to £100 an hour.
What is an electrician's day rate?
Checkatrade puts the average day rate at about £400 for an eight-hour day, and Logic4training's 2026 survey found an average of around £312. Most quotes fall between £300 and £400 outside London.
How much does an EICR cost?
An EICR typically costs £120 to £200 for a flat and £200 to £350 for a house in 2026, with London prices of £250 to £400. The price mainly depends on the number of circuits.
How much does it cost to rewire a three-bedroom house?
A full rewire of a three-bed house costs about £5,500 to £8,000 across most of the UK in 2026, and £6,500 to £10,000 in London. Plastering and redecorating are usually extra.
How much does a new fuse box cost?
Replacing a fuse box with a modern consumer unit usually costs £450 to £800 in 2026, with averages of about £525 to £625 depending on the survey. London prices can reach £1,200.
How often do landlords need an EICR?
At least every five years in England, Scotland, Wales and Northern Ireland, or sooner if the last report says so. Landlords must give copies to tenants and fix any dangerous or potentially dangerous problems within the deadlines set in their nation's rules.
Do I need a certificate for electrical work?
Yes, for most jobs. New circuits, consumer unit changes and rewires should come with an Electrical Installation Certificate, and smaller additions with a Minor Works Certificate. For notifiable work in England and Wales you should also get a Building Regulations compliance certificate.
Do electricians charge VAT?
Only if they're VAT registered. Sole traders with a turnover under £90,000 a year don't charge VAT; larger firms must add 20%. Check whether quotes are including or plus VAT.
Can I get a grant for an EV charger?
If you rent or own a flat, or only have on-street parking, you may be able to get up to £500 per socket from the government chargepoint grants, available until 31 March 2027. Homeowners with a driveway are no longer eligible.
How long does it take to replace a consumer unit?
Usually four to eight hours, and your power will be off for most of that time. It can take longer if faults are found when the circuits are tested.
Sources
- Checkatrade – Electrician hourly rates in the UK in 2026 (hourly, day and emergency rates; socket, light, shower, fuse box and rewire prices; EICR average)
- Checkatrade – Consumer unit replacement cost 2026
- MyBuilder – Electrician hourly rates
- Fantastic Services – Electrician cost 2026 (hourly and day rates, London and rest of UK)
- Fantastic Services – Electrical cost guides 2026 (EV charger, socket, fault finding, EICR)
- Fantastic Services – House rewiring cost 2026 (rewire by property size)
- Fantastic Services – Fuse box replacement cost 2026
- Fantastic Services – Socket replacement cost 2026
- MyJobQuote – Cost to rewire a house 2026 (time on site, city averages)
- MyJobQuote – Consumer unit installation cost (average £525, EICR range)
- MyJobQuote – Cost to rewire a house in London
- Logic4training – Electrician day rates UK (June 2026)
- HaMuch – Average electrician hourly rate in the UK 2026 (minimum charges, out-of-hours rates)
- Trade2base – Electrician day rates UK 2026 (smoke alarm prices)
- Best Builders – How much do electricians charge in 2026 (downlights)
- Less.co.uk – Electrician cost 2026 (outdoor socket)
- GOV.UK – Electrical safety standards in the private rented sector
- Crawley Borough Council – Guide to the Renters' Rights Act 2025 (civil penalties up to £40,000 from 1 May 2026)
- Department for Communities NI – Electrical Safety Standards for Private Tenancies Regulations (NI) 2024
- Propertymark – Keeping current with electrical safety deadlines (Wales 14-day rule)
- Planning Portal – Part P: electrical safety
- IET – Part P Building Regulations (England and Wales)
- GOV.UK – EV chargepoint grant for renters and flat owners
- Find a grant – EV chargepoint grant for households with on-street parking (£500 from 1 April 2026, until 31 March 2027)
- GOV.UK – VAT registration threshold
- Citizens Advice – Getting a problem with a service put right
- Electrical Safety First