The short answer
Anyone who works on gas in your home – fitting or repairing a boiler, servicing a gas fire, connecting a gas hob or moving a gas pipe – must by law be on the Gas Safe Register. Checking takes about two minutes:
- Ask for the engineer's Gas Safe licence number when you book. It's a seven-digit number on their ID card.
- Look it up using the "Check an engineer" tool on the Gas Safe Register website, call 0800 408 5500, or text GAS followed by the licence number to 85080.
- When they arrive, ask to see the Gas Safe ID card. Check the photo, that it's in date, and the security hologram.
- Turn the card over and check the back lists the exact type of work they're doing for you – boilers, cookers, gas fires, LPG and so on.
If an engineer can't or won't show you a valid card, don't let them work on your gas. A genuine engineer will be happy to show it; many will offer before you ask. It is a small check that takes less time than making the engineer a cup of tea, and it is the single best protection you have.
Why the check matters
Gas work done badly can cause fires, explosions and carbon monoxide poisoning. Carbon monoxide (CO) has no colour, smell or taste, which is why it's sometimes called the silent killer. A poorly fitted boiler, a blocked flue or a gas fire with the wrong ventilation can all leak CO into a home without anyone noticing until people become ill.
That's why gas work is one of the few jobs in the home where the law is very clear. Under the Gas Safety (Installation and Use) Regulations 1998, anyone carrying out gas work for payment must be registered with the Gas Safe Register, which is the official list of businesses and engineers approved to work safely and legally on gas. It replaced the old CORGI register in 2009 in Great Britain and the Isle of Man, and covers Northern Ireland and Guernsey too.
Most gas engineers are skilled, careful professionals. The check isn't about suspecting everyone – it's about making sure the person in front of you is who they say they are, is currently registered, and is qualified for your particular job.
Being "registered" isn't the whole story
Registration is held by a business, and each engineer working for that business has their own ID card and licence number. A business can be registered while an individual working for it is not qualified for a certain type of appliance. That's why it's important to check the person and the qualification, not just the company name on the van.
Step by step: how to check a Gas Safe engineer
Before they come out
When you book the job, ask for:
- The business name and its Gas Safe registration number.
- The name of the engineer who'll attend, and their seven-digit licence number.
- What kind of gas work they're registered for (it should match your job).
Then check them online. On the Gas Safe Register website, choose Check an engineer, and enter the licence number from the card (or search for the business by name, registration number or postcode). The result shows the engineer's photo, the business they work for and the categories of work they're currently qualified to do.
When they arrive
Ask to see the ID card before any work starts, and look at both sides.
On the front of the card, check:
- The photo matches the person standing in front of you.
- The licence number matches the one you checked.
- The business name is the business you booked.
- The start date and expiry date – it must be in date today.
- The security hologram is present.
On the back of the card, check:
- The type of gas work you need is listed (for example, central heating boilers, cookers or gas fires).
- Whether they're qualified for natural gas (mains) or LPG (bottled or tank gas), or both – it must match your supply.
- Whether the work is domestic (homes) or non-domestic (businesses).
- The qualifications are up to date – each one has its own expiry date.
If anything doesn't match or you're unsure, call Gas Safe Register before letting them start. It's your home and your safety; a professional will understand.
Understanding the back of the ID card
The back of the card is where people most often get caught out. An engineer can be fully registered to service boilers but not qualified to fit a gas fire, or qualified for natural gas but not LPG.
| What you see on the card | What it means |
|---|---|
| Domestic | Qualified to work in homes |
| Non-domestic | Qualified for commercial premises – a separate category, such as catering kitchens |
| Natural gas | Qualified to work on mains gas |
| LPG | Qualified to work on liquefied petroleum gas (bottles or tanks, caravans, boats) |
| Central heating boilers / water heaters | Boilers, combi boilers and water heaters |
| Cookers | Gas hobs, ovens and range cookers |
| Gas fires / space heaters | Gas fires, wall heaters and some fires with back boilers |
| Meters | Work on gas meters (on the customer side) |
| Catering (non-domestic) | Commercial catering equipment such as restaurant kitchens |
The exact wording on cards changes from time to time, and the Gas Safe Register website has a full explanation of every category. The principle is simple: the job you need must be listed on the back of the card.
Examples
- You need a gas hob connected in your new kitchen. The card must show cookers for natural gas (or LPG if you're off the grid).
- You need your combi boiler serviced. The card must show central heating boilers (sometimes listed with water heaters).
- You run a café and need a new commercial range fitted. The card must show the non-domestic catering category, not just domestic cookers.
- You live in a caravan or park home with bottled gas. The engineer must hold the right LPG qualifications – and some park homes and leisure vehicles have their own specific categories.
How engineers get on the register
It helps to know what "Gas Safe registered" actually involves, because it explains why the card's back matters so much.
Gas engineers prove their competence through assessments, most commonly under the Accredited Certification Scheme (ACS) or an equivalent recognised qualification. Each assessment covers a specific area of work – for example, domestic boilers, cookers or gas fires – and engineers must be reassessed every five years to keep each qualification current. New entrants usually train through an apprenticeship or a managed learning programme, with on-the-job experience, before they're assessed.
Once qualified, the engineer's business registers with Gas Safe Register and pays an annual fee for each engineer. Gas Safe Register also inspects a sample of each registered engineer's work. That's why the register is a meaningful check: it shows the engineer has been assessed for that kind of work, recently, and that their business is accountable.
What it doesn't tell you is how tidy they are, how well they communicate or whether their prices are fair – for that, use reviews, recommendations and written quotes.
Which jobs need a Gas Safe engineer?
Here's a quick guide to everyday jobs in the home.
| Job | Gas Safe engineer needed? |
|---|---|
| Fitting, moving or replacing a gas boiler | Yes |
| Annual boiler service | Yes |
| Repairing a boiler (anything inside the casing) | Yes |
| Fitting, disconnecting or moving a gas hob or cooker | Yes |
| Fitting or servicing a gas fire | Yes |
| Moving or extending gas pipework | Yes |
| Landlord gas safety check (CP12) | Yes |
| Bleeding radiators | No |
| Topping up boiler pressure using the filling loop | No – follow your manual |
| Replacing a radiator with no gas work involved | No – a plumber or heating engineer can do it |
| Changing a room thermostat | Usually no gas work, but follow the manufacturer's instructions |
If you're unsure, the rule of thumb is: if the work involves anything that carries or burns gas, it needs a Gas Safe engineer.
Gas Safe vs other registers
Not all heating work involves gas, and other fuels have their own schemes.
| You have | Who should do the work |
|---|---|
| Mains gas boiler, fire or cooker | Gas Safe registered engineer (natural gas) |
| LPG boiler, fire or cooker | Gas Safe registered engineer qualified for LPG |
| Oil boiler or oil tank | OFTEC-registered technician |
| Solid fuel stove or open fire | HETAS-registered installer |
| Heat pump (for grants) | MCS-certified installer |
| Electric boiler or electrics | Registered electrician (for example, NICEIC or NAPIT) |
Many heating engineers hold several of these registrations. As always, ask, check and keep copies of certificates.
Rules for landlords and tenants
If you rent out a home, gas safety isn't optional – it's a legal duty under the Gas Safety (Installation and Use) Regulations 1998.
What landlords must do
- Have every gas appliance, fitting and flue they provide checked for safety every 12 months by a Gas Safe registered engineer.
- Give a copy of the gas safety record to existing tenants within 28 days of the check, and to new tenants before they move in.
- Keep each record for at least two years.
- Make sure gas appliances are maintained in a safe condition (the annual safety check is not the same as a full service; most boilers should also be serviced every year).
A landlord gas safety check, often called a CP12 after the old CORGI form, typically costs about £60 to £90 for a boiler and one appliance in 2026, with more for extra appliances. Many engineers offer a combined service and safety check.
Similar rules apply in Scotland, Wales and Northern Ireland. In England, landlords must also have a working carbon monoxide alarm in any room used as living accommodation that contains a fixed combustion appliance (other than a gas cooker). Gas isn't the only safety check landlords need – our electrician costs guide explains the five-yearly EICR rules in each nation.
What tenants should do
- Ask your landlord for a copy of the current gas safety record, and check the engineer's details on the Gas Safe Register.
- Let the engineer in for the annual check – it protects you.
- Report anything that looks wrong straight away: soot, yellow flames, a strong smell of gas or a CO alarm sounding.
- If your landlord won't arrange a gas safety check, contact your local council's private housing or environmental health team.
Real-life situations: what to check and when
Moving into a new home
When you move into a home you've bought, you have no idea when the boiler was last serviced or whether gas appliances were fitted properly. It's sensible to:
- Ask the seller (through the conveyancer) for the boiler's Building Regulations Compliance Certificate, service history and any gas safety records.
- Book a boiler service and a gas safety check soon after you move in, especially if the paperwork is missing.
- Fit carbon monoxide alarms in rooms with gas appliances before your first night.
- Find the gas meter control valve and the water stop tap.
If you're renting, the landlord should give you a current gas safety record before you move in.
Selling your home
Buyers' solicitors routinely ask for Building Regulations certificates for boilers and other gas work done in recent years. If you've had a new boiler fitted and can't find the certificate, contact the installer, or Gas Safe Register, well before you sell – missing paperwork can hold up a sale.
Fitting a new kitchen with a gas hob
Kitchen fitters, plumbers and electricians often work together on a new kitchen, but the gas connection must be made by a Gas Safe engineer qualified for cookers. If walls are coming out too, a builder will usually coordinate the trades – see how to choose a builder. Make sure:
- Whoever plans the kitchen allows for the correct distances around the hob, and any ventilation the appliance needs.
- The gas engineer is booked for the right stage – usually after the worktops are in.
- You get confirmation that the hob was tested and is safe to use.
Installing a gas fire or stove
Gas fires have strict rules on flues, ventilation and the type of chimney they can use. Before buying a fire, ask a Gas Safe engineer qualified for gas fires to check your chimney or flue. If the chimney itself needs work, that's a job for a roofer or chimney specialist. Some decorative fires need permanent ventilation, which means an air vent you mustn't block.
Renting a holiday cottage or staying in a caravan
Holiday cottages, caravans and boats with gas should have current gas safety records. Take a portable CO alarm with you – they're inexpensive and could save your life in a small, enclosed space. Popular holiday areas such as Cornwall, Devon and Cumbria have plenty of local Gas Safe engineers if you own a holiday let.
Gas safety for businesses
If you run a café, restaurant, pub, hotel, B&B or any business with gas appliances, the same principle applies: only a Gas Safe registered engineer qualified for non-domestic work on your type of equipment can work on it.
- Commercial catering equipment, such as ranges, fryers and combination ovens, needs an engineer with commercial catering qualifications – a domestic cooker qualification isn't enough. Look for the catering category under "non-domestic" on the back of the card.
- Commercial kitchens often need gas interlock systems that cut the gas if the extraction fan stops. Your engineer should check these.
- Employers have duties under health and safety law to make sure gas appliances, pipework and flues are maintained in a safe condition.
- Many insurers and local authority food safety officers ask to see an up-to-date gas safety certificate for a commercial kitchen.
Signs of unsafe gas work or appliances
Knowing the warning signs helps you spot problems early, whoever fitted the appliance.
- A lazy yellow or orange flame on a hob or gas fire instead of a crisp blue one (some decorative "flame-effect" fires are designed to burn yellow – check the manual).
- Black or brown sooty marks on or around an appliance.
- Pilot lights that keep going out.
- Increased condensation on windows in the room with the appliance.
- A smell of gas, however faint.
- People in the home suffering headaches, dizziness, nausea, breathlessness, collapse or loss of consciousness – especially symptoms that ease when you leave home, or that pets share.
What the engineer's warning labels mean
If an engineer finds something unsafe, they follow an industry procedure and will explain it to you. You may hear these terms:
| Classification | What it means | What usually happens |
|---|---|---|
| Immediately Dangerous (ID) | A risk to life or property right now | With your permission, the appliance is disconnected and labelled "Do not use". If you refuse, the engineer can report it to the gas emergency service. |
| At Risk (AR) | Faults that could become dangerous | With your permission, the appliance is turned off and labelled. You're advised not to use it until repaired. |
| Not to Current Standards (NCS) | Not dangerous, but doesn't meet today's standards | You're told, and may be advised to upgrade. Fine to use. |
Never use an appliance that's been labelled Immediately Dangerous or At Risk until it's been put right by a Gas Safe engineer. If you think a classification is wrong – for example, you suspect someone is trying to sell you a new boiler – get a second opinion from another Gas Safe engineer.
Questions to ask before you book
A quick phone call or message can tell you a lot. Ask:
- What's your Gas Safe registration number, and the licence number of the engineer who'll attend?
- Are you qualified for this exact appliance and fuel (natural gas or LPG)?
- What's the price – fixed for a service, or call-out fee plus hourly rate for a repair?
- Will you give me a service record or gas safety record afterwards?
- If parts are needed, will you tell me the price before fitting them?
- For a new installation, will you notify Building Control, and when will I get the certificate?
- What guarantee do you give on your work?
Red flags: when to say no
Most problems with illegal gas work involve people who aren't registered at all. Be very wary if:
- Someone offers to fit a boiler or gas hob "cash in hand" at a price far below anyone else.
- They say they're "CORGI registered" – CORGI hasn't been the gas register since 2009.
- They can't show an ID card, or the card is out of date, or the photo doesn't match.
- The card is for a different business than the one you booked.
- The back of the card doesn't list the work they're about to do.
- They say a "mate" will sign off the work afterwards.
- They tell you there's no need for Building Regulations notification on a new boiler.
- They pressure you to agree to an expensive replacement on the spot after labelling an appliance unsafe.
You don't need to argue. Simply say you need to check their registration first, and call Gas Safe Register. Genuine engineers won't mind.
After the job: paperwork to keep
Gas work should leave a paper trail. Depending on the job, you should receive:
- An invoice or receipt showing the business name, address and Gas Safe registration number.
- For a new boiler or gas appliance installation: a Building Regulations Compliance Certificate, which is sent after your registered installer notifies the work through Gas Safe Register – usually within a few weeks.
- For a boiler installation: the completed Benchmark commissioning checklist and warranty registration details.
- For a landlord check: the gas safety record, listing each appliance checked and any defects found.
- For a service: a service record, often written into the Benchmark section of the boiler manual.
Keep these together. You'll need them if you sell your home, claim on a warranty or have a dispute.
What to do about illegal or unsafe gas work
If you think gas work in your home was done by someone who isn't registered, or a registered engineer has left something unsafe:
- Stop using the appliance if you have any concerns about safety, and call the gas emergency number if you smell gas or suspect CO.
- Report it to Gas Safe Register. It investigates reports of illegal gas work and, where appropriate, can arrange for an inspector to visit and check the work.
- Keep evidence: invoices, messages, adverts, photos and the engineer's details.
- Contact the business in writing if it was a registered firm, explaining what's wrong and what you'd like done.
- Get advice from Citizens Advice (England and Wales), Advice Direct Scotland or Consumerline (Northern Ireland) about getting the work put right or your money back.
Working on gas without being registered is a criminal offence, and serious cases are prosecuted by the Health and Safety Executive. Reporting it can protect other people too.
Finding a Gas Safe engineer you can trust
The register tells you who's legally allowed to work on gas. It doesn't tell you who turns up on time, explains things clearly or charges a fair price. To find someone good:
- Start with local recommendations – neighbours, friends and local groups.
- Look at local directory listings to see who covers your area and how long they've been trading.
- Check every name on the Gas Safe Register before you get in touch, and confirm their qualifications cover your job.
- Read recent, detailed reviews on more than one site, especially for the type of work you need.
- Ask for a clear price – for a service, a fixed price; for repairs, the call-out fee and hourly rate; for installations, a written quote. Our guides to new boiler costs and plumber costs show what's typical in 2026.
- Ask about guarantees, both on parts and on the engineer's own work.
Once you have a shortlist, compare gas and heating engineers in your area – for example in London, Bristol, Sheffield, Newcastle, Swansea or Belfast – or start from your town on our locations page.
Keeping your home gas safe all year
- Fit audible carbon monoxide alarms in every room with a fuel-burning appliance, and near sleeping areas. Look for alarms marked EN 50291. Test them monthly and replace them when they reach their end-of-life date.
- Service gas appliances every year – boilers, gas fires and other heaters. A standard boiler service costs around £100 in 2026.
- Keep vents and flues clear. Never block air vents, and don't stack things against a boiler flue outside.
- Know where your meter control valve is, and how to turn it off (the lever is usually at a right angle to the pipe when off).
- Watch the flames on your hob – they should be crisp and blue.
- Don't DIY gas. Even fitting a gas cooker with a bayonet connector should be done by a Gas Safe engineer.
- Take care in holiday homes, caravans and boats, where LPG and small spaces increase the risk. Take a portable CO alarm with you.
What a proper boiler service includes
Once you've checked your engineer, it helps to know what you're paying for. A boiler service is more than a quick look. While every manufacturer's checklist is slightly different, a thorough service on a modern gas boiler normally includes:
- A visual check of the boiler, its casing, seals and pipework for signs of leaks, corrosion or damage.
- Checking the flue and its terminal outside, making sure it's correctly fitted, sealed and not blocked.
- Running the boiler and using a flue gas analyser to measure combustion – this is how the engineer checks it's burning gas cleanly and safely.
- Checking the gas pressure and gas rate against the manufacturer's figures.
- Removing the casing to inspect and, where needed, clean key parts such as the burner, heat exchanger and condensate trap.
- Testing safety devices, such as the flame failure device and pressure relief valve.
- Checking the system pressure and expansion vessel.
- Filling in the service record in the Benchmark section of the manual, and telling you about anything that needs attention.
A service usually takes 30 minutes to an hour. If an engineer is in and out in ten minutes without using a flue gas analyser or opening the casing, it wasn't a full service. In 2026 most people pay about £80 to £120 for a standard gas boiler service.
Common myths about gas safety
"The company is registered, so anyone they send must be fine." Registration belongs to the business, but each engineer has their own card and qualifications. A registered company can send someone who isn't qualified for your particular appliance. Always check the individual's card.
"I used them last year, so they're still registered." Registration is renewed every year, and individual qualifications expire too. It takes a minute to check again.
"A gas cooker just plugs in, so I can fit it myself." Even a cooker with a bayonet connection needs to be fitted, tested and checked for stability by a Gas Safe engineer qualified for cookers. Doing it yourself is illegal and risky.
"If there's a problem, I'll smell it." Natural gas has a smell added so you can detect leaks, but carbon monoxide has no smell at all. A CO alarm is the only reliable way to detect it.
"My boiler is new, so it doesn't need a service." Most manufacturers require a service every 12 months from the date of installation to keep the warranty valid, including in the first year.
"A yellow flame just means it's old." On most hobs and gas fires, a yellow or orange flame is a sign of incomplete burning, which can produce carbon monoxide. Get it checked. (Some decorative fires are designed to burn yellow – your manual will say.)
"Landlords only need a certificate when a tenant moves in." The check must be done every 12 months for as long as the home is let, not just at the start of a tenancy.
Your home gas safety checklist
Run through this list once a year – perhaps when the clocks go back:
- Boiler serviced within the last 12 months by a Gas Safe engineer.
- Gas fires and other gas heaters serviced within the last 12 months.
- A working, in-date carbon monoxide alarm in every room with a gas appliance.
- CO alarms tested this month.
- Air vents clear and not blocked by furniture, boxes or draught-proofing.
- Boiler flue outside clear of plants, sheds and stored items.
- Hob flames burning crisp and blue.
- Everyone at home knows where the gas meter control valve is and how to turn it off.
- The gas emergency number (0800 111 999, or 0800 002 001 in Northern Ireland) saved in your phone.
- Building Regulations certificates and service records filed somewhere safe.
Frequently asked questions
How do I check if an engineer is Gas Safe registered?
Use the "Check an engineer" tool on the Gas Safe Register website with the seven-digit licence number from their ID card, call 0800 408 5500, or text GAS and the licence number to 85080. When they arrive, check the photo, expiry date and hologram on the front of the card, and the qualifications on the back.
What should a Gas Safe ID card show?
The front shows the engineer's photo, name, licence number, business, start and expiry dates and a security hologram. The back lists the types of gas work they're qualified to do, such as boilers, cookers or gas fires, whether for natural gas or LPG, and whether domestic or non-domestic.
Is CORGI still valid?
No. CORGI stopped being the official gas register in 2009 when the Gas Safe Register replaced it. Anyone claiming to be "CORGI registered" for gas work today is out of date at best.
How often do Gas Safe cards expire?
Engineers renew their registration every year, so cards last 12 months. Each individual qualification on the back also has its own expiry date.
Can a plumber fit a gas cooker?
Only if they're also Gas Safe registered and qualified for cookers. A plumber who isn't on the register can't legally connect or disconnect a gas appliance.
Do I need a Gas Safe engineer to service my boiler?
Yes, for any gas boiler. Annual servicing by a Gas Safe registered engineer is also required by almost every boiler manufacturer to keep the warranty valid.
How often do landlords need a gas safety certificate?
Every 12 months. Landlords must give tenants a copy within 28 days of the check (and to new tenants before they move in) and keep records for at least two years.
What does "At Risk" mean on my boiler?
It means the engineer found a fault that could become dangerous. With your permission they'll turn the appliance off and label it. Don't use it until it's repaired. If you're unsure, get a second opinion from another Gas Safe engineer.
What should I do if someone did illegal gas work in my home?
Stop using the appliance if you're worried about safety, call the gas emergency number if you smell gas, and report the work to Gas Safe Register, which can investigate and may arrange an inspection.
Does Gas Safe cover Northern Ireland?
Yes. Gas Safe Register covers Great Britain, Northern Ireland, the Isle of Man and Guernsey. In Northern Ireland, the gas emergency number is 0800 002 001.
Can I check a Gas Safe engineer without their licence number?
Yes. On the Gas Safe Register website you can search for a business by name, registration number or postcode and see its registered engineers. But the licence number on the individual's ID card is the best way to confirm that the person at your door is the engineer listed.
What if the engineer's card is out of date?
Don't let them start work. Call Gas Safe Register on 0800 408 5500 to check – the engineer may have renewed recently and not yet received a new card, and the register will be able to tell you whether they're currently registered.
Do I need a Gas Safe engineer to remove an old gas fire or cooker?
Yes. Disconnecting a gas appliance and safely capping the gas supply is gas work, so it must be done by a Gas Safe registered engineer. Leaving an uncapped or poorly capped pipe is a serious risk. Ask the engineer to label the capped pipe and confirm it's been tested for leaks.
Is it worth checking an engineer from a big national company?
Yes. Large firms employ and subcontract many engineers, and the person who turns up should still have their own ID card with the right qualifications for your job. The check takes a minute and applies to everyone, whoever they work for.
Sources
- Gas Safe Register – check an engineer and ID card guidance
- Gas Safe Register – what the ID card categories mean
- HSE – Check an engineer: are they Gas Safe registered? (text check to 85080)
- HSE – Domestic gas safety FAQs
- HSE – Gas safety: landlords and letting agents
- Lancaster City Council – Find a Gas Safe engineer factsheet (front and back card checks)
- OVO – How to find a trusted Gas Safe registered engineer
- Fantastic Services – Heating and boiler cost guides 2026 (landlord gas safety certificate £60–£90)
- MyJobQuote – Boiler service cost 2026
- GOV.UK – Smoke and carbon monoxide alarm regulations (England)